Table of Contents
What size breaker do I need for a 24000 BTU Mini Split?
15 amp breaker
You need a minimum 15 amp breaker for mini split systems up to 24,000 BTU/2 tons. A 20 amp breaker is sufficient for 36,000 BTU/3 ton systems, and a 30 amp breaker meets requirements for larger units to 60,000 BTU/5 tons.
How many amps does a 24000 BTU Mini Split draw?
16 SEER: 24000 BTU Inverter Mini Split – Heat Pump: Enjoy full season comfort during the summer or winter with this 24,000 BTU Inverter Mini Split with 27,000 BTU Heat Pump….WHAT IS DC INVERTER?
| Power Supply (VAC): | 230 / 208 – 60Hz |
|---|---|
| Current: (rated / max) – Heating | 10.2 / 12.2 Amps |
| MCA: | 17 Amps |
| HVAC breaker size: | 25 Amps |
What size breaker do I need for my mini split?
Use a 20A breaker and 12 AWG (or larger) wiring. Because this is HVAC equipment, a 14 AWG circuit and 15A breaker is insufficiently sized. This is a continuous load, so you’re only allowed to size to 80\% of the rated ampacity, and the next larger size is 12 AWG and 20A.
What size breaker is needed for a 18000 BTU Mini Split?
It would need a 20A double-pole breaker and 12 AWG wire (2 hots+ground, no neutral). This system uses 1/4″ and 1/2″ size copper pipes. What gauge wire is required for the 18000 mini split? This system would take a 20A double-pole breaker with 12 AWG wire.
Do you need 200 amp service for mini split?
If you only install a mini-split air-source heat pump, you won’t need to upgrade to a 200 Amp service. You may need to upgrade to a 200 Amp service if you plan to install more than one unit.
How many amps does a 18000 BTU Mini Split use?
An 18,000 BTU air conditioner is capable of drawing about 8 Amps of power.
How many amps does a mini split use?
Typically, you will need between 15 and 45 amps per mini split. That is about 110 to 120 volts on the low end and 208 to 240 volts on the higher end. Anything that runs on amps must have a circuit to prevent amp overload.