Table of Contents
How many m3 are in a tonne stone?
1 m3 = 1.5t – 2.2t of crushed stone depending on the grading and degree of compaction.
What is 16 cubic Metres in tonnes?
Cubic meters to metric tons (or tonnes) table
| Cubic meters | Metric tons (or tonnes) |
|---|---|
| 16 m³ | 15.744 t |
| 17 m³ | 16.728 t |
| 18 m³ | 17.712 t |
| 19 m³ | 18.696 t |
How many cubic meters are in a ton of 20mm gravel?
1 ton 20mm aggregate to cubic meter :– 20mm aggregate or stone chips is categories as coarse aggregate, dry density of 20mm aggregate = 1550 kg/m3, it means 1m3 of 20mm aggregate weight is 1550kg or 1.55ton, 1 ton = 1000kg, 1 ton 20mm aggregate or stone chips to cubic meter = 1000/1550 = 0.6450 m3, so 1 ton 20mm …
How do I calculate tons of gravel?
Length in feet x Width in feet x Depth in feet (inches divided by 12). Take the total and divide by 21.6 (the amount of cubic feet in a ton). The final figure will be the estimated amount of tons required.
How many square meters does a ton of gravel cover?
14 square metres
How many square meters does a ton of gravel cover? One tonne will cover 14 square metres. If you want to apply them in a normal depth 50 mm for a driveway. 1 tonne will be sufficient to cover approximately 20 square metres for pedestrian pathways, 35mm depth is normally sufficient for pedestrian pathway.
How much does a cubic meter of gravel weigh?
The gravel is assumed clean of dirt and other debris. How much does a cubic meter of gravel weigh? A cubic meter of typical gravel weighs 1,680 kilograms 1.68 tonnes. A square meter of gravel with a depth of 5 cm weighs about 84 kg or 0.084 tonnes. The numbers are obtained using this gravel calculator.
How many tons in a yard of gravel?
Because one cubic yard of gravel is equal to 1.13 tons, you can multiply your total cubic yards by 1.13 to convert this measurement to tons. How many yards is 24 tons?
How many cubic meters is a ton of crushed concrete?
How many cubic meters is a ton of crushed concrete? 1.98 cubic meters How many tons is a cubic meter of stone? 1 m3 = 1.5t – 2.2t of crushed stone depending on the grading and degree of compaction.
How do you convert 1 ton to M3?
Convert 1 Tons (metric) to Cubic meters (t to m3) with our conversion calculator and conversion tables. To convert 1 t to m3 use direct conversion formula below. 1 t = 1000 m3. You also can convert 1 Tons (metric) to other Weight (popular) units.