Why does ping return a different IP address?

Why does ping return a different IP address?

Cause. When you perform a ping with a name instead of an IP address, the name has to be resolved to an IP address. Therefore, the ping command returns an incorrect IP address. When there are multiple addresses on a network adapter, IPv6 addresses are preferred.

Which is incorrect IP address?

Reserved Addresses 0.0″ and “255.255. 255.255.” Another number, “127.0. 0.1” is called the “localhost;” every computer on a network refers to itself as this address. Because these numbers have special meanings, the network does not assign them to PCs; such addresses would be invalid.

What does pinging this IP address verify?

A ping (Packet Internet or Inter-Network Groper) is a basic Internet program that allows a user to test and verify if a particular destination IP address exists and can accept requests in computer network administration. Ping is a simple way to check for a response from a host.

How do I ping an IP address?

How to run a ping network test

1. Type “cmd” to bring up the Command Prompt.
2. Open the Command Prompt.
3. Type “ping” in the black box and hit the space bar.
4. Type the IP address you’d like to ping (e.g., 192. XXX. X.X).
5. Review the ping results displayed.

What do I do when my wifi doesn’t have a valid IP configuration?

Fix the “Wi-Fi Doesn’t Have a Valid IP Configuration” Error Now

1. Restart Your Computer.
2. Reboot Your Router.
3. Release and Renew Your IP Address.
4. Reset Network Protocols.
5. Check for a Manual IP Address Setting.
6. Update Your Wireless Driver.
7. Check for Malware and Antivirus Interference.
8. Increase the Number of DHCP Users.

How do I ping multiple IP addresses?

While the ping command is used to ping a single host device to identify its existence, ping sweep helps to ping multiple IP addresses simultaneously. It’s a basic network scanning technique used to determine the range of active and inactive IP addresses available on the network.

How do I check my ping IP address?

For Windows 10, go to Search in the taskbar and:

1. Type “cmd” to bring up the Command Prompt.
2. Open the Command Prompt.
3. Type “ping” in the black box and hit the space bar.
4. Type the IP address you’d like to ping (e.g., 192. XXX. X.X).
5. Review the ping results displayed.

What does the ping command do?

ping is the primary TCP/IP command used to troubleshoot connectivity, reachability, and name resolution. You can also use this command to test both the computer name and the IP address of the computer.

What does failed to find IP address mean?

Cause of “Failed to Obtain IP Address” Android Error Either your device was intentionally blocked, or the connection problem is due to a router problem. It’s also possible that your Android’s own network hardware or software is malfunctioning or corrupt.

What is Pingping under Windows 7?

Ping under windows 7 or vista will report unreachable IP address in this way, rather than “no reply from” that you may be used to seeing. Think you’re an IT whiz? Try and ace our quiz! TFTP server and Cisco Anyconnect client SSL VPN can’t connect. Track users’ IT needs, easily, and with only the features you need.

How to check if ping response is ICMP or not?

It’s also not impossible that the ping response might be an ICMP error message — you can try dumping the actual packets with tcpdump/Wireshark, and see exactly what you’re getting in response. You can also try connecting to that IP address with HTTP, HTTPS, SSH, telnet, RDP, etc.

How to resolve multiple IP addresses at the same time?

It’s possible that a machine has multiple NICs (and therefore multiple IP addresses). Try to resolve that IP address into a hostname. ping -a in Windows. Linux can use host or dig -x . The hostname of that IP address might be useful to you or your network admin. (I’d try resolving both IPs you’re dealing with)

Is Ping the best tool to resolve resolution issues?

And please note, ping is not the best tool to resolve resolution issues. Nslookup is the better tool. However, even in some cases, such as figuring out an AD issue, especially with AD Sites involved, nslookup doesn’t help and would need to look at AD specific diagnostics. It also depends on the application’s resolution requirements.