Table of Contents
Does the ALU contain registers?
In addition to ALU modern CPU contains a control unit and a set of registers. Most of the operations are performed by one or more ALU’s, which load data from the input register. Registers are a small amount of storage available to the CPU. These registers can be accessed very fast.
Which register does the ALU stored its results?
When the next clock arrives, the destination register stores the ALU result and, since the ALU operation has completed, the ALU inputs may be set up for the next ALU operation.
Is ALU and processor same?
The difference between ALU and CPU is that ALU is an electronic circuit, which is a subsystem of CPU that performs arithmetic and logical operations while a CPU is an electronic circuit that handles instructions to operate the computer.
Does ALU do all the processing?
ALU is the “calculator” portion of the computer. An arithmetic logic unit(ALU) is a major component of the central processing unit of the a computer system. It does all processes related to arithmetic and logic operations that need to be done on instruction words.
Why does the ALU use registers to store data?
Registers. Registers are small amounts of high-speed memory contained within the CPU. They are used by the processor to store small amounts of data that are needed during processing, such as: the address of the next instruction to be executed.
How is the ALU different from CU?
Difference Between ALU and CU is that arithmetic logic unit is another component of the processor which performs arithmetic, comparison, and other operations. While control unit is the component of the processor that directs and coordinates most of the operations in the computer.
What is the difference between the program counter register and the register in the ALU?
The program counter (PC) holds the address of the next instruction to be executed, while the instruction register (IR) holds the encoded instruction. Upon fetching the instruction, the program counter is incremented by one “address value” (to the location of the next instruction).
Where does the ALU store the output of the CPU?
After calculation/manipulation the ALU stores the output in an output register. The CPU can be divided into two section: data section and control section. The DATA section is also known as data path. In early computers “BUS” were parallel electrical wires with multiple hardware connections.
What is the difference between an ALU and a register?
Most of the operations are performed by one or more ALU’s, which load data from the input register. Registers are a small amount of storage available to the CPU. These registers can be accessed very fast. The control unit tells ALU what operation to perform on the available data.
What is the difference between Alu and cu in computer architecture?
The ALU executes arithmetic and logic operations, the registers supply operands to the ALU and save the results of ALU operations, while the CU orchestrates the fetching (from memory) and execution of instructions by directing the coordinated operations of the ALU, registers and other components.
What is the function of a a register in a CPU?
A register is a small amount of storage available as part of a CPU. The control unit tells the ALU what operation to perform on that data, and the ALU stores the result in an output register. The control unit moves the data between these registers, the ALU, and memory.