Table of Contents
- 1 What is the first step in reacting to a fire?
- 2 What are the first three things you have to consider or do when there is fire?
- 3 What is the correct sequence of fire protection steps?
- 4 What is the first thing you have to do if there is a fire in the lab?
- 5 What kills you first in a fire?
- 6 What is the first thing you do when preparing to use a fire extinguisher?
- 7 What is the first thing to do if there is a fire in the lab quizlet?
- 8 What should you do before leaving the lab?
- 9 What do I do in the event of a fire?
- 10 What to do immediately following a fire?
- 11 What to do if a fire starts?
What is the first step in reacting to a fire?
General fire response procedures must be implemented immediately upon suspicion of a fire. Remove patients and personnel from the immediate fire area if safe to do so. Activate Alarm and notify others. Activate nearest audible fire alarm by pulling the handle down on alarm.
What are the first three things you have to consider or do when there is fire?
The 3 things a fire needs are heat, fuel and oxygen. These three elements work together to help a fire start and take over. However, if any of the three elements are removed from a fire, then it will extinguish and no longer pose a threat.
What is the first thing you should do if a fire breaks out in your home or Neighbourhood?
As you escape, remember: crawl on the floor if there’s smoke – the air is cleaner near the floor. on the floor, put your nose as low as possible – remember, smoke is toxic and can kill you. as you go out, only open the doors you need to and close any open doors you can to slow the spread of the fire.
What is the correct sequence of fire protection steps?
Remember, if you feel that you cannot safely extinguish the fire using the portable extinguisher available and if you have not already done so, pull the fire alarm, evacuate the area, and then call the fire department. When using an extinguisher, use the PASS system – Pull, Aim, Squeeze, Sweep.
What is the first thing you have to do if there is a fire in the lab?
should always pull the fire alarm and call 911 to evacuate the building and bring the fire department. ➢ Keep areas around all types of heating equipment clear of combustibles at all times. While working in a lab you notice that smoke is coming from a fume hood across the room.
What is your first priority if a fire breaks out?
Fires spread very quickly, so the first priority is to warn others around you. If you’re in a building and it doesn’t delay your escape, then press the nearest fire alarm and call 999 or 112 for emergency help. If it delays you, make the call when you’ve left the building.
What kills you first in a fire?
The Carbon Monoxide Might Kill You First This only happens in large fires, where multiple people were executed at once. Dying from carbon monoxide is also common for people caught in house fires.
What is the first thing you do when preparing to use a fire extinguisher?
Approach the fire standing at a safe distance. Aim the nozzle or outlet towards the base of the fire. Squeeze the handles together to discharge the extinguishing agent inside. To stop discharge, release the handles.
What 4 actions would you take in the event of a fire?
In summary:
- Be prompt and calm.
- Turn off any hazardous machinery.
- Do not stop to collect personal belongings.
- Head to the nearest fire exit.
What is the first thing to do if there is a fire in the lab quizlet?
If a beaker or test tube catches fire, invert an empty larger beaker over it to smother the flames. Use the fire extinguisher, then inform the instructor. They work for 10 to 20 seconds. Pull the pin, aim at the base of the fire, squeeze the handle.
What should you do before leaving the lab?
Before leaving the lab, you’ll need to make sure it’s thoroughly cleaned so it’s ready and safe to work in again. Make sure to clean all used glassware, return reagents to the storage area, dispose waste in the right containers and clean your workbench.
What is the first thing you should do if fire breaks out in your home or Neighbourhood?
as you go out, only open the doors you need to and close any open doors you can to slow the spread of the fire. feel doors with the back of your hand before you open them, if they’re warm, don’t open them – the fire is on the other side. if you’re escaping with others, stay together if you can.
What do I do in the event of a fire?
Knowing exactly what to do in case of a fire is important. The most important thing to do is to practice your escape plan and teach it to anyone who is living in your house. They should know what they need to do in case of a fire and how to react in a real emergency scenario.
What to do immediately following a fire?
Make sure all family members and pets are accounted for.
What do you use to start a fire?
To start a fire, choose a location, make a fire pit, gather firewood, and ignite the fire using a magnifying lens and tinder. You need pine needles, twigs, logs, large branches and rocks to successfully make a fire.
What to do if a fire starts?
If a fire does start in your home, it is important to exit the building as quickly as possible. Do not delay escaping to collect belongings. Fire extinguishers can be used to quickly stop a small fire before it has time to spread.