Table of Contents
How many outlets can be placed on a 15 amp household circuit?
8 outlets
Technically, you can have as many outlets on a 15 amp circuit breaker as you want. However, a good rule of thumb is 1 outlet per 1.5 amps, up to 80\% of the capacity of the circuit breaker. Therefore, we would suggest a maximum of 8 outlets for a 15 amp circuit.
Should I get 15 or 20 amp outlets?
Standard 15-amp receptacles are suitable for typical household appliances, lamps and other accessories. A 20-amp receptacle is for heavy-duty appliances and power tools, such as air compressors. Residential garages occasionally have 20-amp receptacles to accommodate larger power tools.
What kind of Romex is used for outlets?
The following NEC regulations apply to Romex conductors:
| Wire Gauge or Type | Rated Amperage | Common Uses |
|---|---|---|
| 12-2 Romex | 20 A | Lighting and Outlet Circuits, refrigerator |
| 10-2 Romex | 30 A | Electric water heater, baseboard heaters |
| 10-3 Romex | 30 A | Electric Clothes Dryer |
| 6/3 Cu Range Cable | 50 A | Range, Heatpump, On-Demand Electric Water heater |
How many outlets can you have on a 20 amp circuit?
In most circuits, only one outlet is likely to be in use at any one time, so it’s a good strategy to spread as many as possible around the house on a single circuit to guarantee you have power where you need it. One rule of thumb is to assign a maximum draw of 1.5 amps to each receptacle, which allows for 10 receptacles on a 20-amp circuit.
How many receptacles can a 20-amp generator handle?
For the most part, they can handle up to 10 receptacles. A good rule of thumb is to give each receptacle a maximum draw of 1.5 amps. That means up to 10 receptacles on a standard 20-amp circuit. Don’t want to do it yourself?
How many electrical outlets do I need for a kitchen?
Your kitchen must have at least two outlets, each on separate circuits, so that if one breaker trips, you still have power. Adding lights to each circuit balances the load and avoids the necessity for separate lighting circuits.
How many amps can a 20 amp circuit breaker handle?
The NEC does specify that a circuit breaker shouldn’t handle more than 80 percent of the load for which it is rated unless the breaker is labeled otherwise. By this standard, the total current draw on a 20-amp circuit shouldn’t exceed 16 amps.