What is 4 4 pin EPS cable?

Posted on by Author

What is 4 4 pin EPS cable?

4+4 Pin ATX/EPS. A hybrid of the 4 PIN ATX12V and EPS 12V connectors that can be split in half or combined to accommodate either the EPS 12V Socket or the ATX 12V socket. Provides additional power to the CPU.

What does EPS12V stand for?

EPS12V refers to the 8-pin connector used for CPU power. ATX12V is the form factor (ATX form factor, supplies 12V, internally converted to 5v and 3.3v as well).

What does the ATX power connector do?

An ATX power supply provides a number of peripheral power connectors and (in modern systems) two connectors for the motherboard: an 8-pin (or 4+4-pin) auxiliary connector providing additional power to the CPU and a main 24-pin power supply connector, an extension of the original 20-pin version.

READ:   What is the point of Blu-ray DVD combo packs?

Do you need atx12v?

This connector is used to supply additional 12V current to the motherboard. While the system will likely still run without it, higher current demands such as extreme overclocking or large video card current draws may require it. “

What is the 4 pin power connector for on motherboard?

4-pin Fan. The 4-pin Fan power connector is found on motherboards within a computer case. This connector provides power to cooling fans and is typically used on the fan that cools the CPU. This connector uses the same power arrangement as the 3-pin connector, therefore, a 3-pin connector can be used on a 4-pin fan.

What is a 20 pin ATX power connector?

An ATX style connector is a replacement for the older P8 and P9 AT style connector. It is one of the largest connectors inside a computer. It connects a power supply to an ATX style motherboard. As shown in the picture, the 20-pin cable is a multi-color cable and may be labeled as P1. Note.

READ:   What is KPO and BPO Class 11?

What is a 20 pin connector?

It is one of the largest connectors inside a computer. It connects a power supply to an ATX style motherboard. As shown in the picture, the 20-pin cable is a multi-color cable and may be labeled as P1.

What is ATX 12V 4 pin?

The ATX 4-pin power supply connector is a standard motherboard power connector used to provide +12 VDC to the processor voltage regulator.

Should I use the 4+4 or 8-pin EPS connector?

The 4+4 can be plugged into the 8 pin EPS connector. The 8 pin connector is good for up to around 320-350 watts. If you’re not gonna overclock the processor, your processor is not gonna get close to this value. The 4 pin connector can be left unused, it would be nice if you use it but it’s not a must.

Do I need a 4+4 or 6+2 pin connector?

The 4 pin connector can be left unused, it would be nice if you use it but it’s not a must. The 6+2 are for pci-e cards. Also, if you really want to, you can probably go on sites like cablemod and order custom cable with 2 EPS (8 pin) connectors or 1 EPS and 1 4+4 or whatever combination you want.

READ:   Does ACLS count as a certification?

How many 4+4pin cables does a 650W power supply have?

Seasonic Focus Plus Gold/Platinum 650W also has only one 4+4pin cable, to have two 4+4pin cables you need to buy at least a 750W PSU. The same goes for be quiet! Straight Power 11 – 650W has one 4+4pin cable, 750W has one “P8” (8pin I suppose) and one “P4+4” connector.

What’s the deal with the 8pin connector on a 650W PSU?

Which means with a 650W PSU (or even a Corsair RM750i) you’re able to use only the 8pin connector, because your PSU only has one, leaving the 4pin connector on your motherboard not used. What’s the deal with that? If the second (4pin) 12V connector wasn’t needed at all – they wouldn’t add it to the motherboards, right?