Table of Contents
How do I reset my IFB Senorita washing machine?
- Press POWER to turn the washer off.
- Unplug the washer from the power outlet or turn the circuit breaker to the unit off.
- With the power disabled, press and hold the START/PAUSE button for 5 seconds.
- Plug the washer back in, or turn the circuit breaker back on.
How do I reset my IFB front load washer?
Turn the machine off at the powerpoint, wait for one minute, and then turn it back on. If you see no change, you can try a Master Reset. This will reset all of the onboard componentry and is often successfully used by appliance technicians. Open and close the door of the washing machine 6 times within 12 seconds.
How do I fix e1 error in IFB washing machine?
The contact details of the IFB Customer Care will be available on the official website….IFB Washing Machine Error Codes List.
| Error Codes | Message and Solution |
|---|---|
| E 01 | An indication to open and close the door properly |
| E 02 | An indication to turn the water tap ON |
How do I reset my washing machine?
To reset your washing machine, unplug it from the power outlet. Then, plug the washer cord back into the wall. Finally, open and close the washing machine door six times to send the reset signal to the system components.
What is error 9 in IFB washing machine?
If you can see either E09 or an LED continually flashing nine times between pauses your washing machine has detected a problem with a specific part. Error code E09 means there is something the matter with the part in the washing machine control board that drives the motor.
What is e2 error in IFB washing machine?
IFB Washing Machine Error Codes List
| Error Codes | Message and Solution |
|---|---|
| E 01 | An indication to open and close the door properly |
| E 02 | An indication to turn the water tap ON |
| E 03 | The plug needs to be fit properly/the socket needs to be replaced |
| E 04 | The code indicates that the washer will restart after about 30 min |
How dO I reset my washing machine?
What is H1 in IFB washing machine?
If input voltage is too high then AC H1 error will come. So wait for sometime to stabilize the voltage then washing machine will start automatically.
What are the error codes on my ififb washing machine?
IFB Washing Machine Error Codes List Error Codes Message and Solution OFEr / Pr5 Switch OFF the program selector and wait dPEr An indication to press the Start/Pause b HEAt This indicates that the drain program sh ACHı Meaning that the machine will start auto
What to do if your washing machine has error codes?
The following is a comprehensive list of error codes with cause and solution for washing machines of popular brands. The issue with the water supply of the machine. 1. Check the inlet hose that connects your machine to the tap. 2. Remove any clog or kink inside it and wash it thoroughly. 3. If the problem persists, replace the hose.
What does P10 mean on the screen?
If Program Selector Is rotated during program run, P XX will be displayed on the screen. (XX will be 01 for lightly soiled, 02 for normally soiled, 15 for Synthetic). Hence, P10 denotes Cradle Wash program. Shift the program selector to Cradle Wash position and let it complete. Hope this helps. Please up-vote if it does. Fast. Simple. Free.
Is IFB a good brand for washing machines?
IFB Appliances is one of the most popular companies for washing machines. Here is the IFB Washing Machine error codes list for your reference. IFB Appliances is one of the most popular companies in line for washing machines. Their washing machines are best known for high speed and cradle wash technology.