Table of Contents
How do you measure the distance a tree will fall?
Measure the distance to the base of the tree from the stick on the ground, using a tape measure or by counting your paces. If the tree base is 35 feet away from the stick, for instance, the tree’s top will land about 35 feet from the base after it falls.
How do you measure an axe eye?
Step 2: Measure the eye of the axe Measure the length and width of both sides at the widest point, and the smallest side should be the bottom of the eye. These measurements should be close, but knowing which side is which will make all the difference.
How does a axe work?
The axe is an example of a simple machine, as it is a type of wedge, or dual inclined plane. This reduces the effort needed by the wood chopper. It splits the wood into two parts by the pressure concentration at the blade.
What unit is used to measure the height of a tree?
Many clinometers and Abney levels have a percent-grade scale that gives 100 times the tangent of the angle. This scale gives the tree height in feet directly when measured at a distance of 100 feet (30 m) from the tree. The same process is used to measure the height of the base of the tree above or below eye level.
How do you measure an axe handle?
Stretch a tape measure from the top of the axe head to the tip of the handle. Hook the end of a tape measure over the top of the axe head in line with the handle of the axe. Pull the tape measure down the length of the axe handle until you reach the furthest tip of the handle.
How long should my axe be?
True full-size felling axes are 36 inches long, but that’s usually way too large for most people’s needs. Instead, consider getting a 31-inch full-size axe and 28-inch “boy’s axe”. The latter, despite the name, is a great all-rounder in terms of size.
How do you estimate how tall a tree is?
Sight over your hand to the base of the tree, and sight over the stick to the top of the tree. Measure how far you have moved from the tree. The measurement, in feet, is the tree’s height.
How do you cut down a tree with an axe?
Cut a notch on the side of the tree facing the direction you wish it to fall (Fig. 113) and cut it half-way through the trunk. Make the notch, or kerf, large enough to avoid pinching your axe in it.
How long should a felling axe be?
The handle of a felling axe is typically 31 to 36 inches long. Pick a size of felling axe that you will be comfortable with—not too light and not to heavy. Try to get the tree to fall in the direction of the prevailing wind.
How do you measure the height of a tree?
Stand near the trunk of the tree and walk out as many feet as you estimate the tree to be tall. For instance, if you think the tree is 30 feet in height, walk thirty paces from the trunk. Turn toward the tree.
How do you cut a tree so it falls in half?
Cut to a depth of about 1/3 the diameter of the tree. Cut another notch on the opposite side about a foot above the first. The wood between the two cuts creates a “hinge,” holding the tree in place as it begins to fall.