How many floors can I build?

How many floors can I build?

One can build or construct G+3 Floors on a 40×60 / 2400 sq ft site (Ground Floor shown as parking in Approval drawing). As per BBMP Plan sanction bylaws, one can get a FAR of 2.25 for a road width of 40ft.

How do you calculate floor of a building?

Floor area ratio (FAR) is the measurement of a building’s floor area in relation to the size of the lot/parcel that the building is located on. FAR is expressed as a decimal number, and is derived by dividing the total area of the building by the total area of the parcel (building area ÷ lot area).

How do you calculate the total floor of a house?

Measure the length and width, in feet, of each room. Multiply the length by the width and write the total square footage of each room in the corresponding space on the home sketch. Example: If a bedroom is 12 feet by 20 feet, the total square footage is 240 square feet (12 x 20 = 240).

How do you calculate construction area?

If the size of the plot or land being used for a project is 500 sq ft and the FAR determined for that particular city/locality is 1.5, then, the total floor area that can be constructed will be 750 sq ft (500×1.5).

How do you calculate the floor area of a building?

Multiply the square footage times the number of floors in the building. Subtract the square footage of any elevator shafts, lobbies (other than on the first floor), or rooms that house only equipment used for the building’s operation. The result is the gross floor area.

Does sq ft of a house include all floors?

Any space that has walls, flooring, ceiling and heat would count as finished square footage.

How much does it cost to build a 20×30 plot in Bangalore?

In Bangalore, one can come across 20*30 plots where they don’t leave Setbacks and Follow the wall to wall construction. These small sites generally have narrow roads within 18 ft to 25 ft Depending on the Layout master plan design. Cost of Construction for a 20×30 Site for G+2 floors varies from Rs 25 lacs to Rs 35 lacs.

What is the cost of construction for building a house in Bangalore?

This article explains the cost of construction for building a house in Bangalore. The Basic House construction cost for G+2 floors is Rs 1400 per / sq ft to Rs 1700 per sq ft. The cost is based on various factors and selection of materials suggested by the selected Architects hired to design the project.

How many floors can I build on a 40×60 plot?

Generally, on a 40×60 plot, one can build a maximum of G+3 Floors considering Ground floor is left for parking. You can also build G+4 if the plot is facing above 40ft or 50 ft road or in case if the plot comes in the commercial zone where one can achieve more BUA.

How to calculate G+2 houses in Bangalore?

You should hire a reliable contractor to execute the contract as per the terms without any issues. If you go to G+2 houses in Bangalore, the total constructed area will be 800 sq. ft. (ground floor) + 1000 sq. ft. (1st floor) and 1000 sq. ft (2nd floor) = 2800 sq. ft.