Table of Contents
What is Carbohydrazide used for?
Carbohydrazide is used to stabilize color developers that produce images of the azo-methine and azine classes. Carbohydrazide has been used to develop ammunition propellants, stabilize soaps, and is used as a reagent in organic synthesis.
What is the purpose of chemicals dosed in the feed water?
Chemicals are put into boiler water through the chemical feed tank to keep the water within chemical range. These chemicals are mostly oxygen scavengers and phosphates. The boiler water also has frequent blowdowns in order to keep the chloride content down.
Is hydrazine an amine?
Being bifunctional, with two amines, hydrazine is a key building block for the preparation of many heterocyclic compounds via condensation with a range of difunctional electrophiles.
Is Carbohydrazide volatile?
Carbohydrazide reacts with oxygen at low temperatures and pressures, and the products of the reaction are volatile. Heating carbohydrazide may result in an explosion. Carbohydrazide, like hydrazine, will also passivate metal surfaces.
Why is nh2 nh2 added in boiler feed water?
One of the properties of hydrazine is that it is an oxygen scavenger, and because of this, hydrazine is dosed into the boiler system to remove the remaining trace levels of dissolved oxygen. It is for this reason that the measurement of dissolved oxygen and hydrazine is imperative on power station plant.
What is the role of nh2 nh2 in boiler feed water?
In boilers where high chloride levels exist, the effect of oxygen corrosion is increased. One of the properties of hydrazine is that it is an oxygen scavenger, and because of this, hydrazine is dosed into the boiler system to remove the remaining trace levels of dissolved oxygen.
Why marine boiler water treatment is required?
Proper treatment of make-up waste and boiler water is necessary to prevent scale, or other deposits, and corrosion within the boiler. The absence of adequate external and internal treatment can lead to operational upsets or total boiler failure.
Why hydrazine is used as rocket fuel?
Hydrazine is used as a rocket fuel because it reacts very exothermically with oxygen to form nitrogen gas and water vapor. The heat released and the increase in number of moles of gas provide thrust. The combustion of hydrazine is an exothermic reaction.
What is carbohydrazide used for in boilers?
Carbohydrazide prevents corrosion by forming a protective passive film on metal and boosting pH in condensate line, thereby increasing the shelf-life of boilers. Although it may be added to the boiler system at any point, it is most efficient to treat the boiler feed water, preferably as it comes from the de-gasifiers.
What are the uses of carbohydrazide?
Carbohydrazide has dibasic and very reactive properties. It is used as a component in jet fuels because it produce a large amount of heat when burned. It is used as rocket fuel.it is used as an oxygen scavenger for water boiler feed and heating systems to prevent corrosion damage. It is used as a reducing agent for the recovery of precious metals.
Why do boilers use hydrazine instead of ammonia?
As a knock on effect will slightly increase boiler water alkalinity. Stable at high temperatures so is used more than hydrazine to control the steam line alkalinity as there is less chance of copper corrosion which occurs with the prescience of ammonia Proper boiler water treatment eliminates sludge and scale deposits within the boiler.
What amines are available for boiler water and condensate treatment?
Bio-Source offers the following amines for boiler water and condensate treatment: Cyclohexylamine – An amine with a high neutralizing capacity, which is extremely important in treating systems where the feedwater has a high alkalinity.