Can my car amp handle 8 ohms?

Can my car amp handle 8 ohms?

First of all, using a higher impedance than what your amp is nominally rated for is always ok. In fact, if your amp is rated for 4 and 2 ohm impedances, typically you will get less power into 8 ohms meaning that your amp will run cooler and more efficiently at higher impedances.

How many watts do you need for a 15 inch sub?

The Comp 15-Inch Subwoofer works best with a sealed or ported enclosure and 250 watts of recommended power.

What is better 2 ohm or 8 ohm?

The main difference between series (8 ohms) and parallel (2 ohms) wiring is whether you’re more likely to be voltage limited or current limited. Judging by the difference between the 8 ohm and 2 ohm power delivery of your amplifier, it would seem you’re more current limited, so I would wire for 8 ohms.

Are car speakers 8 ohms?

Traditionally 8 ohms are used for home and some theater speakers. 4 ohm speakers are generally used for car use, with some 2 ohm models used at times (usually subwoofers). For example: 8 ohm speakers are used in home stereo systems and require 1/2 the current of a 4 ohm speaker.

How many amps do I need to drive an 8 ohm speaker?

It sounds like your max current rating would be about 1.76 A if you have a typical 8 ohm speaker. P=(I^2)R. In the same way, P=(V^2)/R. So the voltage would be around 14V.

Are 8 ohm speakers good for car speakers?

The noises are often produced from the car speakers, but 8-ohm speakers do not produce any irritating sound. The car speakers often get overheated soon and also destroy other components of the car.

What size AMP do I need for my subwoofer?

Posted on 6/24/2015. Anthony, For your subs, look for a mono subwoofer amplifier that can put out between 600 and 1200 watts RMS into a 2-ohm load. As for your full-range speakers, look for a 4-channel amp that can put out 75 to 100 watts RMS per channel at 4 ohms.

How much power does each speaker get from the AMP?

In that case, each speaker would receive half of the amplifier’s 4-ohm power. On the Crown website is a calculator that determines the amplifier power required to achieve the desired SPL at a certain distance. It also accounts for the number of dB of amplifier headroom needed for audio peaks.

What amp to pair with a DVC 4 ohm subwoofer?

That DVC 4-ohm sub is rated for 500 watts RMS, and will work bet with an amp that can put out 500 watts RMS at 2 ohms, like an MTX THUNDER500.1, or a Pioneer GM-DX871. Joe Magruder from Stpeters Posted on 9/12/2020