Can two devices with different subnets communicate?

Posted on by Author

Can two devices with different subnets communicate?

Devices in different subnets can communicate. That is the purpose of a router. Routers route packets between different networks. Even if devices in different networks are on the same layer-2 broadcast domain, you need a router to let the devices communicate at layer-3.

Can PCS on different subnets communicate?

Computers located on different subnets may need to communicate directly with one another. Accomplishing this requires that the two machines be connected to a router, which can forward information based on routable IP addresses.

How do two different subnets communicate?

To get the subnets to talk to each other, you need to set the gateway address on each router to the other subnets server address, Why are you running multiple networks without routers to protect them?

Can two different networks communicate?

On a computer network, all devices that are connected to the same local network can talk directly with each other. But to do so they need to have IP addresses that belong to the same IP network. Computers that belong to different IP networks have to communicate with each other via a router.

READ:   Can AIS have feelings?

How do I setup two subnets on one network?

2 Answers

  1. Disconnect the second router.
  2. Reset it (just be sure)
  3. Change its IP address to 192.168.
  4. Set up the WiFi network as desired (probably the same as your other router to allow roaming)
  5. Disable DHCP.
  6. Connect a LAN port of your second router to a LAN port of the primary router.

Can subnets talk to each other Azure?

By default, there is no security boundary between subnets, so VMs in each of these subnets can talk to one another. However, you can set up Network Security Groups (NSGs), which allow you to control the traffic flow to and from subnets and to and from VMs.

Can two hosts different subnets communicate without router?

A subnet is just a range of IP addresses. All the devices in the same subnet can communicate directly with one another without going through any routers.

Can different subnets use the same gateway?

If two subnets or vlans are connected to the same switch, they most definitely can share the same physical exit (router interface) out of the network but because a gateway is defined by its IP address making it unique to a subnet, both subnets can not have the share the same gateway.

How do I connect two different networks?

All you have to do in the router that connects the two networks it this:

  1. Configure each of two Ethernet ports into different VLANs.
  2. Assign each VLAN an IP address in one of your two networks.
  3. Connect each port to the network that port’s VLAN has an IP address in.
  4. Make sure the router is configured to do routing.
READ:   How long does it take for an American to learn Swedish?

How do two computers communicate on a different network?

The Ethernet standard is what allows these machines to talk to one another. Each computer (or printer or other device) that is connected to this Ethernet cable is set up to have a unique address, or IP Address.

How do two computers communicate with each other?

Step 1: Connect two Computers using an ethernet cable. Step 2: Click on Start->Control Panel->Network and Internet->Network and Sharing Center. Step 3: Click on option Change Advanced Sharing Settings in the upper-left side of the window. Step 4: Turn on file sharing.

Can you have 2 different subnets on the same switch?

Switches can carry as many subnets as you want them to because they don’t know, or care, about IP routing. It’s actually fairly common in small setups to have a router (“gateway”) with multiple IP addresses, one per subnet, on a single Ethernet port.

Can two computers on the same subnet open a connection?

Answer Wiki. If the computers are on the same network segment and have the same subnet mask, then providing they have different host addresses on the subnet they should be able to open a connection. For example, if the mask is 255.255.255.0 and the computers are on addresses 192.168.1.1 and 192.168.1.2 they have compatible addresses.

READ:   What is the difference between alternate and augmentative?

Can two computers on the same network communicate via a switch?

A switch routes packets based on hardware (MAC) addresses. The two computers are both connected to the same switch, so as long as each computer can use ARP to resolve the MAC addresses for the other machine, they can communicate via the switch. Although the two network specifications are different, they are compatible:

Can two hosts share the same subnet mask?

Unfortunately, no, you are incorrect. Ron makes a good point, you didn’t provide a subnet mask, so if we were to assume the classful mask, the 10.x.x.x address would have a 255.0.0.0 mask, which would actually put the two hosts on the same network. If that is the case, they would have no problem communicating.

What happens if the destination is on another network?

If destination is on another networks means forwards packet to next hops on basis of route entry Configured on network . However layer2 device cannot understand IP address . Only same subnets traffic can be handle by layer2 device, traffic is forwarded based on mac-address table