Do you have to open the damper with gas logs?

Do you have to open the damper with gas logs?

One caution, though: Fireplaces with installed gas logs are required to have the damper open at all times. That’s either because a pilot light is constantly burning under the logs or because the homeowner might forget to open the damper when he or she turns on the fire. Those gases contain carbon monoxide.

Does a gas fireplace have a damper?

Gas fireplaces don’t have a damper themselves, but certain types of gas fireplace will be indirectly associated with the use of a masonry fireplace damper. Although there’s no damper within our chimney, many open fireplaces do have dampers and they must be kept open for as long as a gas fireplace is installed.

How do I adjust the damper on my fireplace?

How to use the fireplace damper to control the fire

1. Open the fireplace damper all the way when starting a fire.
2. Let the fire burn for a few minutes then adjust the damper so that it is partially closed (about half way) to see how it affects the fire.

How do I know if my fireplace has a damper?

If your chimney has a traditional damper, all you need to do is shine a flashlight up the chimney. If you can see the sky, it is open. If you see closed metal or ceramic slats, you know it needs to be opened.

Can you run gas fireplace with damper closed?

somewhat like the way a gas range in a kitchen works. Since there is little or no exhaust, they can be burned with the damper closed. The beauty of this type of system is that 99.9\% of the heat produced by the gas logs goes into the room, so they produce substantially more heat than their vented counter-parts.

Does a gas fireplace need a vent?

Traditional gas fireplaces, like their wood-burning cousins, require an exhaust flue (vent) to remove harmful fumes from the home. When possible, an existing chimney is used to run a new flue, but in a home without a chimney, the high cost to install venting can sideline the project permanently.

How can I tell if my gas logs are ventless?

Follow the gas line from beneath the logs to where it disappears in the wall or floor. If the gas is merely contained by a simple gas line, then the logs are vent free. If there is a small cylinder attached to the gas line, then the logs are vent-free.

Do you need a flue for a gas fireplace?

Do Gas Fireplaces Need A Flue? Natural vent gas fireplaces may not have a flue but will use the existing chimney flue to vent waste air from a home. Direct vent gas fireplaces will need a flue that vents air directly out of a home, and ventless gas fireplaces won’t need any form of flue.

Is a damper and flue the same thing?

A damper is located in the flue of your chimney. The flue is where the smoke escapes when the fire is going. Dampers are placed inside of the flue to help control ventilation.

How do you use a gas fireplace damper?

The damper in a gas fireplace should remain open all the time. The glass between the firebox and your home prevents cold or heat from coming down the chimney and by leaving the damper open at all times, you eliminate the risk of having gas build up or backdraft into your home.

Do gas fireplaces need a flue?

Which is better vented or ventless gas fireplace?

Ventless fireplaces are more energy efficient than vented fireplaces because no heat escapes up the flue, so you’ll save money on gas utility bills. A vented gas fireplace uses more gas to create the same level of warmth because some of its heat escapes through the flue.

Can you put a gas fireplace in a masonry chimney?

It has a damper down near the smoke chamber which can be opened and closed with chain pulleys (typically) and is generally designed to burn wood. Generally a vented gas log set can be installed in a masonry chimney so long as the gas logs will fit in the existing firebox.

Can you put gas logs in a prefab fireplace?

ALTERATION OPTIONS The expense and labor involved in a prefab fireplace replacement may lead you to consider a conversion or alteration of your fireplace. CAUTION: ABSOLUTELY DO NOT PUT GAS LOGS into a damaged or deteriorated woodburning fireplace.

Will your prefab doors work on my fireplace?

All our prefab doors are after-market fireplace doors. They fit almost every factory-built fireplace on the market, so you can be sure that our glass fireplace doors will even work on your fireplace.

Are natural Glo logs safe for gas fireplace?

In fact, t… Natural Glo Large Gas Fireplace Logs | 10 Piece Set of Ceramic Wood Logs. Use in Indoor, Gas Inserts, Vented, Electric, or Outdoor Fireplaces & Fire Pits. Realistic Clean Burning Accessories . With 10 pieces, this log set is safe and adaptable. Each log is ceramic and does not burn off toxic fumes.