Table of Contents
Do you need a 2 channel amp for 2 subwoofers?
Most 2 channels amps are bridgeable at 2 ohms. If your subs are 4 ohms each, you can wire them in parallel to make a 2 ohm effective load and get the most wattage out of you amp. If you wire each channel separately at 4 ohms, your amp might not even put out the wattage to max out the subwoofers.
How many RMS is 700 watts?
It cant hold that much power continuously. 700 watts RMS is probably more like 450 watts steady. That figure isnt science just an educated guess. Its just a way for manufacturers to claim a few more watts to boost sales.
Should sub RMS match amp RMS?
The sub’s RMS watts rating must match the amp’s power range for optimal sound. Find the amp’s power in RMS watts at 4 ohms, 2 ohms, and 1 ohm. Choose the RMS power rating you’d like to achieve. Your sub’s total impedance will be the load impedance (ohms) of that rating.
What kind of amp is needed for two subs?
Find the Sub’s RMS Rating For multiple subs, multiply the number of subs by their RMS ratings for a total RMS rating. The amp you choose will have to be capable of powering 75\% to 150\% of the total RMS rating for the entire subwoofer system.
How many RMS is 750 watts?
Technical specifications: Monoblock Class D Amplifier. RMS Power at 1 Ohm: 750 Watts x 1-Channel (12.8v) RMS Power at 2 Ohm: 600 Watts x 1-Channel (12.8v)
What size amplifier do I need to power two subwoofers?
Don’t choose an amplifier based on a power rating at an impedance your subwoofers cannot provide Just because your amplifier will do 1,000 watts RMS doesn’t mean it’s the right amp to power two subwoofers that have a power handling of 500 watts each.
What size subs do I need for a 500 watt amp?
Let’s say you choose to maximize the amp’s potential and want the system to put out 500 watts RMS. This means your subs have to be wired to form a total impedance of 2 ohms. Two subs on a 500 watts RMS amp will want about 250 watts RMS each. So you’ll look for subs each rated for 250 watts RMS or more.
What size AMP do I need for two alpine type your swr-8d4 8-inch subwoofers?
You have two Alpine Type R SWR-8D4 8″ subwoofers and you want the right amp for them. They are DVC 4-ohm subs rated at 350 watts RMS each. Two 350 watts RMS subs together need a total of 700 watts RMS. Using the chart in Step 2, 2 DVC 4-ohm subs can be wired together to form a 1-ohm, a 4-ohm, or a 16-ohm load.
How much power do I need for a 55 series subwoofer?
RMS power handling of a 55 series 12” dual 2 ohm voice coil subwoofer is 400 watts. Two of these subwoofers would mean you need 800 watts of power at to the total circuit impedance.