How do I connect my Bluetooth speaker to my computer with aux?

Posted on by Author

How do I connect my Bluetooth speaker to my computer with aux?

How to – Speakers – Play via AUX Input

  1. Insert one end of the AUX cable into the AUX input on the bottom of your speaker.
  2. Insert the other end of the AUX cable into the AUX output port on your audio device.
  3. Turn the SOURCE knob to AUX, then push once to activate.

How can I connect speakers to my computer without aux?

Connect the sound cable with green connectors into the Primary Front Speaker Out port on the back of the computer. Plug the other end of the cable into the green port on the subwoofer. Connect the sound cable with black connectors into the Rear Speaker Out port on the back of the computer.

READ:   How do you rule out prostate cancer from BPH?

How do I connect my Bluetooth speaker to my computer?

  1. Turn on your Bluetooth accessory and make it discoverable.
  2. On your PC, select Start > Settings > Devices > Bluetooth & other devices.
  3. Select Add Bluetooth or other device > Bluetooth.
  4. Choose the device and follow additional instructions if they appear, then select Done.

Can I connect Bluetooth speaker to PC with USB?

Going the USB route is the simplest and fastest way to add Bluetooth to most any PC. Just plug the dongle into an open USB port and install the driver and you are done!

Where do you plug an aux cord into a computer?

The audio input on a desktop computer is usually a 1/8″ mini-jack on the back panel, labeled Line-In or Aux, close to where the speakers will be connected to a similar type of jack.

What can I use instead of an AUX cord?

FM Transmitter — Under $20 An FM transmitter plugs into your cigarette lighter socket and connects to your device via an aux cord or Bluetooth. The transmitter broadcasts what’s playing from your phone over a short FM frequency to which you tune your car’s radio and receive.

READ:   Is it safe to buy Bmrda approved sites?

How to connect two aux cords to Bluetooth speaker?

Two AUX cords are also required for this method. These cords are usually included from your Bluetooth Speaker package. And the last thing to complete this method is a 3.5mm splitter adapter or cable. Step 1: Plug in the two AUX cord in the splitter or cable. Make sure that they’re both 3.5mm jacks.

How to connect Bluetooth speaker to laptop or PC?

Another easy to connect your speakers to a laptop or PC is using a male to male aux cable. Insert of its side in the Bluetooth Speaker and the other one in the jack of your PC. Investing in 3.5mm two-faced Aux cable can be your savior in such situations. You can use this cable to connect the speaker with other devices as well.

What do you need to connect a Bluetooth speaker to a TV?

You will need a Bluetooth receiver, which can be found on Amazon for less than $20. Two AUX cords are also required for this method. These cords are usually included from your Bluetooth Speaker package. And the last thing to complete this method is a 3.5mm splitter adapter or cable.

READ:   Can you get a good GRE score without studying?

What is the AUX port in a Bluetooth speaker used for?

Aux port in a Bluetooth speaker is to enable connection of older source devices which do not have a Bluetooth transmitting module built into them. Eg a cassette player or FM radio etc.