Table of Contents
- 1 How do I fix high error in IFB washing machine?
- 2 What is the reason for error in washing machine?
- 3 How can solve IFB washing machine drain error?
- 4 What does DP error in IFB washing machine?
- 5 What is E3 error?
- 6 How do I fix E3 error?
- 7 What is your experience with IFB service in Hyderabad?
- 8 What does the code unbl mean in my washing machine?
How do I fix high error in IFB washing machine?
If input voltage is too high then AC H1 error will come. So wait for sometime to stabilize the voltage then washing machine will start automatically. If not then call to your electrician to solve the power fluctuations.
What is the reason for error in washing machine?
Common appliance codes could be related to a problem with the door, a water heating sensor, a software or circuit board fault, a motor or pump fault plus much more. Simple things that could have an error code could be the door being left ajar on the machine or the detergent drawer not in situ properly.
Does IFB washing machine have error?
Switch the program selector to OFF position, wait for 2 seconds and restart. If the same message appears again switch OFF the appliance and contact IFB Care….IFB Washing Machine Error Codes.
| Error Message | Solution |
|---|---|
| E 06 | Clean Coin trap |
| r ın5 HOLd | Press start/pause button or select drain program |
| dLAY | Code will be displayed during delay start mode |
How can solve IFB washing machine drain error?
The washing machine might not be draining water because: Filter may be clogged….Troubleshooting steps:
- Open tap; ensure there is water supply with normal pressure.
- Open and close the door firmly.
- Check if the inlet hose is bent or sieve is blocked. Fix the bend and clean the blockage.
What does DP error in IFB washing machine?
Basically “dp er” is drain pump error. If drain pump not working properly in IFB Front Load Washing Machine, then machine showing this code. First we need to check, there is any blockage in drain pipe. Because if there is blocked, then also showing this error.
How do I fix E3 error in IFB washing machine?
You can easily fix this problem by removing any blockages from the drain pump situated at the front of the machine for easy access. Should the error code E3 appears it is warning that the machine is not draining.
What is E3 error?
The E1 or E2 error code is an Auto-Stop Protection Error, indicating an issue detected by a sensor. The E3 error code displays when an Abnormal Operation Protection Error has occurred, and activates to protect the unit from damage. This error code will require service.
How do I fix E3 error?
E3 error code indicates a indoor fan speed malfunctioning which can be affiliated to a bad indoor circuit board or a bad indoor fan motor. In this case, you can first make sure that the indoor or the outdoor fan are not blocked and can spin freely.
How do we solve it if an IFB front load machine shows ACH1?
Originally Answered: How do we solve it if an IFB front load machine shows an ACH1 error? If input voltage is too high then AC H1 error will come. So wait for sometime to stabilize the voltage then washing machine will start automatically. If not then call to your electrician to solve the power fluctuations.
What is your experience with IFB service in Hyderabad?
Service of IFB has been a very bad experience in both Bangalore & Hyderabad. They take minimum 48 hours to attend and times 3–4 days. In Hyderabad, the authorized service center gave fake parts and untrained technicians. They overcharged 2–3 times for spares also. Bosch has a better service.
What does the code unbl mean in my washing machine?
The code UNBL in your washing machine stands for Unbalance means the load inside the drum is not balanced. This error appears normally at the time of extraction ( spin) when machine tries to balance the load inside the drum to reach its maximum set rpm .Just check if there is any unbalance switch in the machine which got activated.