How do I measure my AXE head for a new handle?

How do I measure my AXE head for a new handle?

Measure the length and width of both sides at the widest point, and the smallest side should be the bottom of the eye. These measurements should be close, but knowing which side is which will make all the difference.

How thick should an AXE handle be?

about one and one-half inches
The billet should be about one and one-half inches thick, oversized at the bottom for the fawn’s foot, and about four inches wide. The length of the handle varies with use.

Are all axe handles the same size?

The length of a handle is typically (but not always) measured from the top edge of the ax down to the knob at the bottom. Handles come in two standard lengths — full-sized (or felling) and “boy’s ax.” The standard length for the handle of a felling ax is 36”, but Brett says that’s even too long for most men.

How do you refurbish an old axe head?

You can do a creditable job using only these two items.

1. Step 1: Soak the Axe Head in Linseed Oil. With your tools gathered, you can now begin.
2. Step 2: Sand the Axe Head. After it dries, you can sand the axehead if you want.
3. Step 4: Sharpen.
4. Step 5: Sand the Axe Handle.
5. Step 6: Rub the Axe with Oil.

What kind of wood is best for an axe handle?

hickory
Long, straight-grained woods such as hickory or ash are traditionally chosen for axe handles because they are strong and produce long, straight staves.

What is the best wood to make an axe handle?

Does Ironwood make a good axe handle?

The most common wood used to make axe handles is American Hickory. Other woods used for axe handles include ash, hop-hornbeam (aka ironwood), maple, and white oak.

What makes a good axe handle?

Another important thing to consider, is the alignment of the grains. In a good axe handle, the grains will run parallel to the the head of the axe. For example, if you put the head-side of the handle on the ground and look straight down the end of the handle, the grains should go forward and backward, not side to side.

Why choose American Hickory replacement axe handles?

Premium Axe Handles American Hickory Replacement Axe Handles These handles are of the highest quality. They are hand picked by our staff to insure premium grain orientation, quality of wood, and  superb ergonomics.  If your satisfaction is not met our team will make it right!

What are the best axe brands on Burly Beaver?

Rounding out the list, is one of our ongoing favorites on Burly Beaver. Gransfors Bruk is a Swedish manufacturer of axes (and handles), which was originally founded in 1902. In the 1960s, they were producing over 200,000 axes per year.

Who makes House handle company axes?

The House Handle Company is a family business, which has been making handles for a variety of hand tools (including axes) since 1964. The business was originally started by William House, who partnered with his son, Kenny House. The company is still owned by the House family, and day-to-day operations are led by Kenny and his son Chris House.