Table of Contents
- 1 How is auxiliary power consumption calculated?
- 2 What is auxiliary consumption in solar power plant?
- 3 How can we reduce power consumption in power plant?
- 4 What is an auxiliary power supply?
- 5 How is load calculated?
- 6 What is the use of steam turbine in boiler feed pump?
- 7 How do you calculate the power of a water pump?
How is auxiliary power consumption calculated?
The auxiliary power consumed is in India for the total installed capacity of the order of 11406.06 MW (8.36\% of 1, 36,436 MW)….CO2 CREDITS CALCULATION.
| • | Auxiliary power consumption before the P.F. Improvement = 18000 kW |
|---|---|
| • | CO2 t MW-1 before Improvement = 0.928 ton MW-1 |
What is auxiliary power consumption?
Thermal power plants are the measure source of energy for electricity generation. In thermal power plants part of energy generated by the plants is being consumed by different auxiliaries. The power consumption by these auxiliaries is very high due to poor operation or bad design of the equipments.
What is auxiliary consumption in solar power plant?
auxiliaries that keep plant up for a certain period of time. For a PV plant these auxiliaries are inverter control circuitry, transformer magnetizing circuitry, cooling fan, air conditioner, lights, computers & night time auxiliaries like street light, server etc.
What among the following is the working of feed pump in steam power station?
Hi , Basic function of Boiler feed water pump is to produce sufficient amount of pressure required to turbine inlet with added amount of pressure drop of flow path of boiler components. It raised the pressure of the water to about 50 bar, and also increased water saturation going into the boiler.
How can we reduce power consumption in power plant?
Hence it is utmost important to reduce the BFP power consumption….Best practices to reduce the Auxiliary power consumption (APC) in Sugar based Cogeneration plants.
| Sl No. | Area | APC in \% |
|---|---|---|
| 3 | Turbo generator & its auxiliaries | 10-12\% |
| 4 | Bagasse feeding system | 2-2.5\% |
| 5 | Coal feeding system | 1\% |
| 6 | Bagasse handling system | 4-4.5\% |
What is auxiliary power module?
Abstract- In modern hybrid electric vehicles (HEVs), the Auxiliary Power Module (APM) acts as the DC/DC converter which regulates the power flow between the high voltage (HV) battery and the low voltage (LV) DC bus.
What is an auxiliary power supply?
The auxiliary power supply (static inverter) converts the power for interior light, displays, air conditioning, etc. Even though there is a propulsion inverter, the static inverter is installed in order to supply power that has low voltage and constant frequency.
What is a reactor feed pump?
The reactor pump which acts as a reactor coolant pump is a centrifugal pump, which circulates the coolant necessary to carry away the decay heat.
How is load calculated?
This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed.
What is auxiliary power consumption in a power plant?
Auxiliary power consumption is the amount of power consumed by auxiliary equipment(which help in running the power plants). Auxiliary equipment refers to different motors that are in service like coal mill motors, mdbfp, pumps in dm plant chp, raw water , iph ,etc and in different areas of power plant. Views.
What is the use of steam turbine in boiler feed pump?
In many units, especially in larger units to reduce auxiliary power consumption and for better steam utilization, a steam turbine is used to drive the BFP in the place of a motor. Extraction steam is the main source of steam supply to this boiler feed pump turbine (BFPT).
What is the power consumption of a 1kW electric boiler?
We can remember the following sentence: The power consumption of a 1KW electric boiler operating at full load for 1 hour is 1 degree. The 1 ton electric boiler is about 0.7 MW, which is 700 KW. The power consumption of a 1 ton electric boiler operating at full load for 1 hour is 700 degrees.
How do you calculate the power of a water pump?
Example – Power pumping Water 1 m3/h of water is pumped a head of 10 m. The theoretical pump power can be calculated as Ph (kW) = (1 m3/h) (1000 kg/m3) (9.81 m/s2) (10 m) / (3.6 106)