Table of Contents
How long should I knock in a new cricket bat for?
The knocking in process could take approx. 6 hours depending on how soft the willow is. However, if applying extratec then the knocking in process shouldn’t take longer than 4 hours.
Do you need to oil a new cricket bat?
We recommend oiling the blade when you decide to change the sheet (e.g. between seasons) – two light coats if leaving natural or one light coat if fitting another sheet. 1 coat of oil is around half a tea spoon-full, rubbed in to the face and edges of the blade with a cloth.
How long does cricket bat Oil take to dry?
Using a soft rag, apply a thin coat of oil to the face, edges, toe and back of the bat – it is very important not to over oil. After application, leave the cricket bat in a horizontal position to dry for at least 12 hours. After this time, you can apply a second coat following the same directions as above.
Are New Balance bats pre-knocked?
About Bats These bats are classed as pre-knocked in which means that they are part prepared in the factory, including oiling, pressing under a roller and some hand mallet knocking in.
Should I put Extratec on my bat?
It is by far the best form of bat protection & does not reduce performance. Extratec also assists in maintaining the moisture levels in bats, however we still recommend to lightly oil the exposed timber every 12 weeks or so.
Should you oil a cricket bat before knocking it in?
Knocking in your Cricket bat is an essential part of its preparation. Even if you have purchased a “pre knocked in” bat, further knocking is always required. Apply Raw linseed oil to the face, edges and back of the bat evenly, 2 to 3 teaspoons of oil is the correct amount.
Do GM bats come knocked in?
The GM Now! Service encompasses all of our bats being “knocked-in” by the batmaker in-house, before raw linseed oil is applied to reduce cracking and splitting by maintaining the moisture level of the blade, whilst an clear anti-scuff cover is applied to the face and edges to increase blade durability.
Do cricket bats need knocking-in?
However, bats still need more knocking-in for grains & fibres to compress & strengthen. Knocking-in a bat is a very essential and vital process to ensure its longevity and get the best performance. Cricket Bats are expensive items and it is important to take good care of it.
How long does it take to prepare a new cricket bat?
New Cricket Bat Preparation. We recommend you use either a ball or wooden cricket bat mallet, as this enables you to have greater control during the knocking in process. The knocking in process could take approx. 6 hours depending on how soft the willow is.
Can I use my Willow bat against a hard/newer ball?
However, the bat must be used in the nets against old balls for 3-4 net sessions before being used in the game against a hard/newer ball. All English Willow Bats require preparation (knocking-in and oiling) before it can be used against a hard cricket ball. All bats come pre-pressed from the factory.
How long does it take to knock in a new bat?
Typically, this process requires about 18-20 hours of knocking. If not done right, this may affect the performance and the life of your bat. To save the time and energy of our customers, WHACK Sports uses a fully automated machine to knock in the bats. The bat will be ready to use in 45 minutes.