How much does it cost to get another Mercedes key?

How much does it cost to get another Mercedes key?

Head over to the dealer. Show them your documents and pay the $200 to $300 for your new key. In some cases, new keys may cost up to $560, as reported by Mercedes-Benz owners. Wait 3 to 4 days for the key to be shipped to your dealership.

How do you program a 2003 Mercedes key fob?

Press the lock button on your remote five times consecutively, while the unlock button is still held, at one or two second intervals. Release the two buttons and wait five seconds after pressing the lock button for the fifth time. Press either the lock or unlock button once to finish the programming sequence.

Can you self program a key fob?

Can you program a new key fob yourself? If it is only the key fob itself to unlock the car, you can most often program it yourself. However, programming a key for the start function is impossible without the right tools.

How do you program a 2006 Mercedes key fob?

How do locksmiths program key fobs?

How to Program a Key Fob in 5 Simple Steps (Car Key Guide)

1. STEP 1-Turn on the ignition. You should sit in the driver’s seat with both the ignition key and the key fob with all doors closed.
2. STEP 2-Press the lock button.
3. STEP 3-Turn off the ignition.
4. STEP 4-Repeat the process with other key fobs.
5. STEP 5-Restart the process.

How to open Mercedes key fob?

First,you have to pull down on the silver,square-shaped tab on the bottom of the key. Pull until it releases.

Once you separate the tab,you’ll see a small gap in the fob. Push the key into the narrow and flat end of the fob to open the key cover.

Remove the old battery,and replace with the new battery. Make sure the new battery is facing the correct way.

How do I program a new key?

Programming a Key Sit in the driver’s seat. Insert a programmed key into the ignition. Turn the car on and off. Turn the car on and off with the second working key. Insert and turn the third key. Wait for the security light to turn on.

How do you reset Mercedes computer?

Plug the OBD II scan tool connector into the socket to the left and slightly below the steering wheel. Turn the ignition switch to “ON.”. Press the power button on the scan tool, if it does not come on automatically. Wait for the tool to complete the scanning process. Press the “Reset” or “Erase” button on the scan tool to reset the computer codes.

How do I change the batteries in my Mercedes key?

Stick your key horizontally into the open slot. After you remove the key, you should notice an empty slot around the bottom end of the key holder. Turn your key holder sideways and push your key into the slot. Push the key entirely in, until you cannot push it further, to open the battery compartment.