Table of Contents
- 1 Is it better to use longer or shorter deck boards?
- 2 Can I use 2×4 for floating deck joists?
- 3 Is it cheaper to buy longer boards?
- 4 How much should a 8×10 deck cost?
- 5 How high can you build a deck using deck blocks?
- 6 How much does it cost to build a 10×10 deck?
- 7 Is a deck worth it on a house?
- 8 What kind of wood should I use to build a deck?
Is it better to use longer or shorter deck boards?
In general, you always want to use long boards if you’re able. The more boards you use, the more weak points you’re creating where they join and the greater the chance of damage to your deck. You’ll see less warping and twisting, which in turn means your deck will last a lot longer.
How many 2×6 do I need for a 8×10 deck?
You will need six 4-by-4 or 6-by-6 pieces of lumber for the posts and four 2-by-10 pieces of lumber that are at least 10 feet long. The latter will combine to make up the two large beams to support the deck. You will also need eight 2-by-6 beams for your joists, which have to be at least 8 feet long.
Can I use 2×4 for floating deck joists?
The short answer is yes. 2x4s can work for deck joists. However, they aren’t ideal for spanning long distances without bending or breaking, so you have some limitations. Choosing 2x4s for a low-sitting deck is perfect for keeping your feet out of the mud.
How much cost build a deck?
The average price range of building a new deck in the United States can be anywhere between $4,000 and $11,000. Including materials and labor, a standard deck will cost roughly $30-$60 per square foot. That means, for a standard 14 x 20 foot deck, you can expect to pay around $6,000.
Is it cheaper to buy longer boards?
The longer the deck boards are, the more they’ll cost. That’s a pretty cut and dry observation. But what isn’t as obvious is that when you go longer you may use less boards, which lowers the overall cost.
What length of deck boards is the best?
For a 12-foot wide deck, 2×8 southern pine or SPF lumber will span in one length with spacing between the joists of 12” OC or 16” OC, making it a good choice for deck joists. For an 8-foot deck, 2×6 lumber would be ideal.
How much should a 8×10 deck cost?
Cost To Build A Deck By Size
| Deck Size | Square Feet | Average Cost |
|---|---|---|
| 8×10 | 80 | $1,200 – $2,800 |
| 10×10 | 100 | $1,500 – $3,500 |
| 10×12 | 120 | $1,800 – $4,200 |
| 12×12 | 144 | $2,160 – $5,040 |
How much does labor cost to build a deck?
Labor Cost to Build a Deck. Labor makes up about half of the cost with most pros charging from $15 to $35 per square foot. For an average 300 to 400 square foot deck, you’ll pay roughly $4,500 to $14,000 for labor alone.
How high can you build a deck using deck blocks?
Deck blocks are never good for elevated decks, but for a ground-level deck, they may work. A general rule is any deck that is less than 24″ (600mm) in Canada or 30″ (760mm) in the States.
How much does it cost to build an elevated deck?
Raised Deck Cost At $45 to $50 per square foot, a small 10 x 12-foot second-story deck made from pressure-treated lumber costs $5,400 to $6,000. Increase the size to 16 x 20 feet, and the price soars to between $14,400 and $16,000.
How much does it cost to build a 10×10 deck?
Cost To Build A Deck By Size
| Deck Size | Square Feet | Average Cost |
|---|---|---|
| 10×10 | 100 | $1,500 – $3,500 |
| 10×12 | 120 | $1,800 – $4,200 |
| 12×12 | 144 | $2,160 – $5,040 |
| 12×20 | 240 | $3,600 – $8,400 |
Is it worth it to order a 20×24 deck?
But I have ordered those same lengths here in Georgia. You want dried lumber in standard or better grade not#2 a 20×24 deck is not cheap useing the cheap stuff so it’s worth it to get what you want and it will last your lifetime with a lot less repair down the road. When your spans are shorter, you can use smaller lumber.
Is a deck worth it on a house?
There is nothing in an entire house which takes as much of a beating as a deck. It has even worse exposure than the roof, the same sun but water can pool instead of draining off, the same or worse thermal swings, and it gets foot traffic as well.
Are there any good 6x9s out there?
There are good 6x9s out there but you have to spend a bit more to get them. *an exception is if there’s no easy way to cut out to fit 5.25s, then there are good 4×6 plate components to choose. I have 6×9’s in all four doors, will stick with them.
What kind of wood should I use to build a deck?
However, Cedar would be more beautiful and last just as long with no Chemicals used in its manufacture. If you had no budget limits, then you could use Cypress or Teak. for the decking, you can use pressure treated lumber again, cheap but ugly. You could use one of the new “Composite” materials that are a blend of Pastic and wood fiber, Warning!