What if my ignition coil has power but no spark?
There are a few reasons for no spark, new coil pack could be defective, crank sensor, ignition module or bad wire in primary circuit, faulty ECM/PCM. You may have to have a good technician have a look, diagnose and estimate repair.
What would cause no spark from distributor?
Loss of spark is caused by anything that prevents coil voltage from jumping the electrode gap at the end of the spark plug. This includes worn, fouled or damaged spark plugs, bad plug wires or a cracked distributor cap.
How do you check for ignition coil problems?
Once the engine is cranked, you should look for blue sparks along the spark plug gap. If you can see blue sparks, this proves your ignition coil is working correctly. If you don’t see blue sparks or you see orange sparks, this is a sign that there’s a problem with your ignition coil.
Can ECM cause no spark?
It is extremely rare for a no spark condition to be the result of a faulty coil or ECM. Users get fixated on these items and jump to the conclusion they must be responsible for their problem because these items are easy to see and replace.
What happens when an ignition coil goes bad?
One of the most common symptoms associated with a faulty ignition coil is engine performance issues. Faulty coils may cause the vehicle to experience misfires, a rough idle, a loss in power and acceleration, and a reduction in gas mileage. In some cases the performance issues may even result in the vehicle stalling.
Will a bad coil pack throw a code?
a faulty ignition coil can cause several problems for your engine: 1. check engine light comes on: the car’s computer oversees coil pack operation. if it detects a problem with an ignition coil, it will turn on the check engine light and log any related trouble codes.
How do you tell if a coil has an internal resistor?
To test your ballast resistor you need an ohm meter or multimeter set to ohms. Remove the connectors from both sides of the resistor. The ohms should read between 1.8 and 5 ohms. You should be getting 9 volts to the positive side of the coil.
Why is my engine cranking but not starting?
If the car cranks when you turn the key, but the engine won’t start, it could be because fuel isn’t getting to the engine. One potential reason for this could be dirty fuel injectors. Over time, the fuel injector nozzles can become clogged with rust, corrosion or debris.
Can a blown fuse cause a car not to start?
Usually, a blown fuse just causes a minor car electrical problem, like backup lights or interior lights not working, not being able to use your radio, losing a turn signal, or some of your climate control features not functioning properly. In rare cases, though, a blown fuse can mean that your car won’t start.