Table of Contents [hide]
- 1 What is the design of an airplane wing?
- 2 What are the pods on aircraft wings?
- 3 What are the pointy things on airplane wings?
- 4 What are aircraft wings made of?
- 5 What are the parts of an aircraft wing?
- 6 What are pylons on aircraft?
- 7 What is the difference between a wing root and wing tips?
- 8 Where are the wings of an aircraft attached to the fuselage?
- 9 What is the leading and trailing edge of a wing called?
What is the design of an airplane wing?
An airplane’s wing has a special shape called an airfoil. The airfoil is shaped so that the air traveling over the top of the wing travels farther and faster than the air traveling below the wing. Thus, the faster moving air above the wing exerts less pressure than the slower moving air below the wing.
What are the pods on aircraft wings?
Anti-shock body is the name given by Richard T. Whitcomb to a pod positioned on the upper surface of a wing. Its purpose is to reduce wave drag while travelling at transonic speeds (Mach 0.8–1.0), which includes the typical cruising range of conventional jet airliners.
What are the pointy things on airplane wings?
You know those things on the wingtips of airliners that stick straight up? This is why you’re seeing more of them. Winglets reduce wingtip vortices, the twin tornados formed by the difference between the pressure on the upper surface of an airplane’s wing and that on the lower surface.
What is a wing fairing?
An aircraft fairing is a structure whose primary function is to produce a smooth outline and reduce drag. These structures are covers for gaps and spaces between parts of an aircraft to reduce form drag and interference drag, and to improve appearance.
What are the four types of wings on an airplane?
Number and position of main planes
- Low wing: mounted near or below the bottom of the fuselage.
- Mid wing: mounted approximately halfway up the fuselage.
- Shoulder wing: mounted on the upper part or “shoulder” of the fuselage, slightly below the top of the fuselage.
- High wing: mounted on the upper fuselage.
What are aircraft wings made of?
aluminum
Airplane wings are made out of aluminum — although not the same aluminium in cans and tin foil. It’s aerospace grade stuff, an alloy with strength comparable to steel. In addition to the wings being constructed from high-power materials, there’s a hidden support system within each wing.
What are the parts of an aircraft wing?
Wings
- Ailerons. Ailerons are one of the three primary control surfaces that control a plane (along with the Elevator and Rudder) and are located on the trailing edge of the wing to help control the roll of a plane.
- Flaps. Flaps, like ailerons, are located on the trailing edge of the wing.
- Winglet.
- Slats.
- Spoilers.
What are pylons on aircraft?
A pylon connects the engine to the airframe of an aircraft. This design uses air passing through the pylon to actively disrupt the jet engine exhaust stream after it exits the engine, disrupting and redistributing the axial and azimuthal distributed sources of jet noise from the aircraft.
What is aircraft fillet?
Fillet (aircraft), a fairing smoothing the airflow at a joint between two components.
What are the different types of wings?
Salt and Pepper Wings.
What is the difference between a wing root and wing tips?
The wing tips are farther off the ground than the wing root. Highly maneuverable fighter planes, on the other hand usually have the wing tips lower than the roots giving the aircraft a high roll rate. The Wright brothers designed their 1903 flyer with a slight anhedral to improve the aircraft roll performance.
Where are the wings of an aircraft attached to the fuselage?
The wings of an aircraft can be attached to the fuselage at the top, mid-fuselage, or at the bottom. They may extend perpendicular to the horizontal plain of the fuselage or can angle up or down slightly.
What is the leading and trailing edge of a wing called?
The top view shows a simple rectangular wing geometry, like that used by the Wright brothers. The front of the wing (at the bottom) is called the leading edge ; the back of the wing (at the top) is called the trailing edge. The distance from the leading to trailing edges is called the chord.
What are the different types of wing construction?
In general, wing construction is based on one of three fundamental designs: 1 Monospar 2 Multispar 3 Box beam More