Table of Contents
What is the difference between AUX and input?
Aux inputs have 10 kΩ impedance while aux outputs have 75 Ω to 150 Ω impedance. The outputs have a nominal voltage level of -10 dBV (0.300 VRMS). Headphone inputs have 8 Ω to 600 Ω impedance while headphone output jacks have 0.1 Ω to <24 Ω impedance. Headphone amps help to boost impedance up to 0.5 Ω to 50 Ω.
What is a PC audio input?
The audio input on a desktop computer is usually a 1/8″ mini-jack on the back panel, labeled Line-In or Aux, close to where the speakers will be connected to a similar type of jack. The Line-In input is sometimes marked with the symbol which is not to be confused with the speaker output marked with the symbol.
What is AUX input on speakers?
The AUX port is typically used for audio equipment that receives peripheral sound sources, such as digital music players or audio speakers. The peripheral sound device is connected to an AUX port or another medium such as a vehicle’s audio jack. An auxiliary port is also known as an auxiliary jack or auxiliary input.
Is PC in the same as AUX?
Aux is for auxilliary input – generally things that produce a line level of sound (sound that has not been amplified), as for PC input there will possibly be two differences – one is it will more than likely accept an input that has been pre-amplified (like a headphone jack) as most PC audio out is headphone jack …
Is line in and aux the same?
Either LINE IN or AUX IN is an analogue connection and is still a great connection method if it is available on both your TV (ensure you connect to the AUDIO OUT connection on the rear of your TV) and Sound Bar. This uses and analogue signal through a conventional RCA or 3.5mm stereo jack cable.
What is the blue jack on PC for?
Unless your computer is very old, the jacks are color-coded green for line-out — for speakers or headphones — blue for line-in and pink for a microphone. The microphone and speaker jacks may also have small images next to them. The line-in jack is intended for music players or other audio devices.
Do computer speakers have Aux inputs?
Never seen computer speakers with aux inputs, but in general, all consumer line level inputs work about the same way. Most audio inputs are consumer line level. Some kind of proprietary input which might break any number of “rules” like putting speaker level outputs into RCA terminated cables ( wonder how often that’s caused problems.)
What is the difference between a USB connection and aux?
The main difference between a USB connection and an auxiliary input (AUX) is that one sends unprocessed digital data to the main unit (auto stereo), and the other one sends a processed, analog audio signal.
How do I connect the AUX Out to the stereo output?
The aux out will usually be a stereo output. The aux output is unbalanced. To connect your aux output to twin mono 6.35mm inputs on an interface you will need a Y-Cable (aka breakout cable) like the Hosa CMP-159 below. This takes the stereo signal picked up through the 3.5mm plug and splits it into left and right dual mono 1/4″ TS.
What is the difference between optical and Aux audio?
Though they are both commonly used in speakers and transmit audio, the ways they work are entirely different. This difference comes down, in part, to their connectivity: optical is digital and aux is analogue. By contrast, optical audio is a completely different beast.