What oil should I use on my axe handle?

What oil should I use on my axe handle?

The best oil to use for treating axe handles is pure Tung Oil. Proper application will fully saturate the wood to provide complete waterproof protection for your axe handle. It also outlasts Boiled Linseed Oil, ages better and the finish is harder but still maintains flexibility.

Should you oil an axe handle?

Afterwards, oil the handle with boiled linseed oil (BLO). Now it’s time to oil the axe head. Not only does the oil help protect the metal, but an oiled axe will cut deeper and faster, saving you time and effort when chopping wood. If your sheath is looking dry, give it a nice coat of leather oil inside and out.

What kind of oil do you use on wooden handles?

Linseed or tung oils are often recommended for this job because they dry quickly, but I’ve found that coconut oil or walnut oil work well, too. For this job you do need to bring your tools into a heated space, because any oil you use will penetrate wood handles best at room temperature.

Should I wax my axe handle?

Both will ensure moisture is kept away from the wood fibers of your axe handle. I find oil to be a better option because it provides a more complete protection due to the oil soaking right into the wood fibers. Wax is a good BARRIER, but it can wear away quickly on an axe handle through regular use.

What is the difference between mineral oil and linseed oil?

Mineral oil is non-drying, and will not form a solid barrier. Linseed oil is a drying oil.

How do you condition an axe handle?

Prepare the axe handle by cleaning (with a moist cloth) and drying it. Fine grit sandpaper can be used to remove any ground-in dirt, or surface material. The wood will absorb oil better if it is warmed, so the best time to treat a handle is on a warm sunny day (in summer), or a bright sunny day (in winter).

How do you condition an AXE handle?

How do you seal AXE handles?

Easy Axe Handle Finishes

1. Boiled Linseed Oil (BLO) Boiled Linseed Oil is a great way to quickly bring a Hults Bruk back to its factory look.
2. Tung Oil. Another oil that works great is tung oil.
3. Wax Finishes. If you don’t want to mess around with oils and drying times, try a wax coating.
4. Danish Oil.
5. Pine Tar / Stockholm Tar.

Is tung oil Food Safe on wood?

Tung oil is extracted from nuts. Known for good water resistance, it often requires numerous coats. It leaves a natural finish that darkens the wood while showcasing the grain. Once thoroughly cured, it is food-safe.

When should I use linseed oil on wood?

It is important to apply this finishing oil only on bare or previously oiled wood, since any other finish such as paint, varnish or wax will prevent the penetration of the oil. Painted, varnished or waxed wood will therefore need to be cleaned and/or stripped to bare wood before proceeding with linseed oil application.

How do you seal axe handles?

Wax Finishes Wax is the easiest finish for a handle by far. Just rub on, let dry then buff with a soft cloth, and you’re done. Waxes can wear off a lot faster than oil, but they are so easy to use, it’s often worth it.

How to treat an axe handle with oil?

How to Treat Your Axe Handle with Oil. 1 Step 1. Prepare the Wood. The first step in treating your axe’s handle is one of preparation. Remove any varnish from the handle. Some companies make 2 Step 2. Apply a Thin Layer of Oil. 3 Step 3. Let it Dry. 4 Step 4. Wipe the Handle & Repeat. 5 Step 5. Use the Axe.

How do you remove rust from an axe head?

Remove any excess with a cloth. Leave the oil to dry before refitting the mask. If there is some rust already present, apply some oil and use some wire wool to remove the rust and work oil into the area. Wipe the area clean then apply oil to the whole axe head as above.

How much does it cost to repair an axe handle?

This is a useful trick to know, and can save you a fair bit of money on a new axe handle. New axe handles cost about $10.00. This repair will cost pennies, and save you a trip to the store and the bother of extracting the old handle and replacing it. Note, this repair method will only work for lengthwise cracks.

How do you maintain wooden handles?

To keep the handle is good working order, apply at least one coat of linseed oil per year going forward. Simply take a paper towel and wipe the handle to remove any dirt or dust, then apply a thin layer of linseed oil and let it dry. Aside from oiling your wooden handles, try not to leave your tools laying outside and keep them out of the dirt.