What size furnace do I need for a 2400 square foot home?

What size furnace do I need for a 2400 square foot home?

Chart For Furnace Tonnages And BTUs For 500 – 3,000 Sq Ft Houses

House Size (Sq Ft):	Furnace Size (in BTUs):
2200 sq ft home	99,000 BTU furnace
2300 sq ft home	103,500 BTU furnace
2400 sq ft home	108,000 BTU furnace
2500 sq ft home	112,500 BTU furnace

How many BTU is 2400 square feet?

How many btu do I need to heat 3,000 square feet?

Room/Area Size	Heating Capacity(BTU)
2,000 sq ft	90,000-110,000 BTU
2,200 sq ft	100,000-120,000 BTU
2,400 sq ft	108,000-132,000 BTU
2,500 sq ft	113,000-137,000 BTU

What size furnace do I need for a 2000 square foot home?

approximately 50,000 to 60,000 Btu
A mid-sized home of 2,000 square feet would need approximately 50,000 to 60,000 Btu to heat it properly. With a less efficient furnace operating at 80 percent efficiency this would require a 60,000- to 72,000-Btu furnace.

How many BTU do I need for a 2000 square foot house?

A 2,000-square-foot house would require 60,000 BTUs at the lower figure, or 90,000 at the higher.

How many BTU is a 3 ton furnace?

36,000 BTU/hr
So a 2-ton unit has 24,000 BTU/hr capacity and a 3-ton has 36,000 BTU/hr, and so on. Check out our extended glossary to learn more about other HVAC terms.

How much is a new furnace for a 2000 square foot home?

For a 2,000-square-foot home, it’ll cost around $3,300 for a new furnace based on total square footage and BTU rating.

How many BTUs does a furnace need for a house?

For cooler climates, a very broad estimate of furnace sizing is to select one that generates 40 to 45 BTUs per square foot. At 40 to 45 BTUs per square foot, you’d need a 100,000 to 112,500 BTU furnace to heat your 2,500-square-foot home.

What size Furnace do I need for my home?

A standard that is used by heating and cooling equipment companies is to provide at least 25 to 30 Btu of heat per square feet in the home for a moderate to warm climate. A mid-sized home of 2,000 square feet would need approximately 50,000 to 60,000 Btu to heat it properly.

How many BTU per square foot do I Need?

The general rule of thumb is that furnaces need to provide 25 to 30 BTU output per square foot in moderate climates and 40 BTU output per square foot in colder regions. The furnace output is less than its input. This difference is the unit’s efficiency, and manufacturers express it as a percentage.

How do you calculate BTU per square foot?

To calculate BTU per square foot, start by measuring the square footage of each room you want to heat or cool. Then, add the square footage for each room together. Once you have the total square footage, just multiply that number by 20 to find how many BTUs per hour you’d need to heat or cool the space.