Table of Contents
Where does the remote wire connect to a stereo?
Some of the more common options for connecting the remote turn on wire when using a factory head unit are to the wire connected to a power antenna (older vehicles which do not turn off the antenna when not using the radio) or to the vehicle’s fuse box.
Where does remote turn on wire go?
The turn-on wire (also called the remote wire) is located behind the stereo. On aftermarket stereos, it’s usually a blue and white wire. The remote wire will “tell” your amplifier to turn on whenever the stereo is powered up (usually, whenever the vehicle is turned on).
What is the remote wire on a car stereo?
The remote wire of a Pioneer car stereo unit is used to connect the stereo unit to an amplifier. Amplifiers are commonly added to car audio systems to provide extra power for speakers and subwoofers. Remote wires are included in amplifier wiring kits or can be purchased individually.
Can you run a remote wire to a speaker?
you can use speaker wire for that. Just run the remote wire off your other amp. any copper wire will work it doesnt matter how old or new it is. just find some old copper wire and use it.
Is the power antenna wire the remote wire?
Almost every aftermarket head unit has a remote turn on wire. Some manufacturers call it a power antenna wire. But regardless of the label all it does is output a positive 12 volts when the head unit is turned on. It should be noted that some head units have both a remote turn on wire and a power antenna wire.
Is power antenna the same as remote?
Is remote wire the same as speaker wire?
Speaker wires can be used as remote wires. It doesn’t matter what kind of wire you use for a remote wire. Any copper wire will work when used as a remote wire. Since most speaker wires are made of copper metal, they can be used for remote wiring.
Can I run remote wire with power wire?
Power wire + speaker wire is high level. Run them together if you want. Power wire + RCA is the “bad” one (and even that’s debatable…). Remote can go just about anywhere.
What color is the remote wire?
Wiring Harness Color Standards
| Wire Color | Wire Function |
|---|---|
| Red | Switch / Accessory |
| Black | Ground |
| Blue | Antenna Remote |
| Blue with White Stripe | Amplifier Remote Turn-on |
Do I need a remote wire for my car stereo?
Yes a remote wire is necessary. You must wire the remote wire from the amp to and ignition source of power (a component which turns on when the ignition in the car is engaged.) i.e. the radio. The remote wire signals for the amp to power on. Where does the battery wire for your car stereo go? Any hot wire.
How to wire a remote start wire?
The remote wire requires a 12 volt power source that comes on with the car. The easiest thing to do is to wire it into the fuse box…coordinate with the diagram to find a fuse that comes on when you start the car or turn the key to accessory, such as turn signals, windshield wipers, etc….
How does the remote turn on wire work on a car?
The remote turn on wire receives voltage from the factory electrical system when the ignition is in the ACCESSORY or ON position (keep reading this document for the complete explanation). This voltage is transferred through the remote turn on wire to the amplifier turn on circuit; when the amplifier senses this voltage, it turns the amplifier on.
How do I wire a remote wire to an amp?
the remote wire is for powering on the amp. if you supply it with any 12v+ the amp should work. If you can’t find a remote wire from the HU, You can use a switch. to wire a switch to your amp you need wire the 12+ Connection on your amp to the remote on your amp.