Table of Contents
Which of the microprocessor is an 16bit microprocessor?
8086
In the year 1978, Intel introduced the 16-bit microprocessor 8086 (16-bit bus) and in the year 1979, Intel introduced 8088 (8-bit bus). It had 29,000 transistors.
Is 8086 an 8 bit or a 16-bit microprocessor?
Size − 8085 is 8-bit microprocessor, whereas 8086 is 16-bit microprocessor. Address Bus − 8085 has 16-bit address bus while 8086 has 20-bit address bus. Memory − 8085 can access up to 64Kb, whereas 8086 can access up to 1 Mb of memory.
What makes 8088 a 16-bit microprocessor?
Introduced on June 1, 1979, the 8088 has an eight-bit external data bus instead of the 16-bit bus of the 8086. The 16-bit registers and the one megabyte address range are unchanged, however….Intel 8088.
General information | |
---|---|
Max. CPU clock rate | 5 MHz to 16 MHz |
Data width | 8 bits |
Address width | 20 bits |
Architecture and classification |
Why is data bus 16-bit?
The 8086 is a 16-bit CPU, so internally it can process data in 16-bit quantities. Having a 16-bit data bus means you can fetch and store such a quantity with a single memory access.
How many bits are there in 8086 microprocessor?
16-bit
8086 Microprocessor is an enhanced version of 8085Microprocessor that was designed by Intel in 1976. It is a 16-bit Microprocessor having 20 address lines and16 data lines that provides up to 1MB storage. It consists of powerful instruction set, which provides operations like multiplication and division easily.
What is 16 bits called?
BYTE – 8 bits, unsigned. WORD – 16 bits, unsigned. DWORD – 32 bits, unsigned.
What are 16-bit 8086 microprocessors and difference between microprocessor and microcontroller?
Mai Differences between 8085 and 8086 Microprocessor
8085 Microprocessor | 8086 Microprocessor |
---|---|
It is an 8-bit microprocessor. | It is a 16-bit microprocessor. |
It has an 8-bit wide data bus. | It has 16-bit wide data bus. |
It can address 28 = 256 I/O ports. | It can address 216 = 65,536 I/O ports. |
What are the 16-bit families of Intel?
Intel 8086/Intel 8088.
What is the difference between 8086 and 8088?
Though the architecture and instruction set of both 8086 and 8088 processors are same, still there are differences between them….Differences between 8086 and 8088 microprocessors.
S. No. | 8086 microprocessor | 8088 microprocessor |
---|---|---|
6 | It can read or write either 8-bit or 16-bit word at the same time. | It can read only 8-bit word at the same time. |
What is a 16-bit system?
16-bit is a computer hardware device or software program capable of transferring 16 bits of data at a time. For example, early computer processors (e.g., 8088 and 80286) were 16-bit processors, meaning they were capable of working with 16-bit binary numbers (decimal number up to 65,535).
How many 16-bit registers are there in 8086?
The 8086 has eight more or less general 16-bit registers (including the stack pointer but excluding the instruction pointer, flag register and segment registers). Four of them, AX, BX, CX, DX, can also be accessed as twice as many 8-bit registers (see figure) while the other four, SI, DI, BP, SP, are 16-bit only.
Why is the Intel 8086 called a 16-bit CPU?
Why is the Intel 8086 CPU called a 16-bit CPU? Because that’s how Intel marketed it. The 8086 is part of “the range of 16-bit processors from Intel” (see for example Introduction to the iAPX 286, page 3-1). The 8086 Primer says “In 1978, Intel introduced the first high-performance 16-bit microprocessor, the 8086.”
What are the key features of 8086 microprocessor?
8086 is designed to operate in two modes, i.e., Minimum and Maximum mode. It is an 8-bit microprocessor. It is a 16-bit microprocessor. It has a 16-bit address line. It has a 20-bit address line. It has a 8-bit data bus. It has a 16-bit data bus. The memory capacity is 64 KB. The memory capacity is 1 MB.
When was the first 16-bit microprocessor introduced?
The 8086 Primer says “In 1978, Intel introduced the first high-performance 16-bit microprocessor, the 8086.”
How many 16 bit registers are there in 8086?
Intel 8086 registers The 8086 has eight more or less general 16-bit registers (including the stack pointer but excluding the instruction pointer, flag register and segment registers). Four of them, AX, BX, CX, DX, can also be accessed as twice as many 8-bit registers (see figure) while the other four, SI, DI, BP, SP, are 16-bit only.