Table of Contents
Why do star destroyers have bridges?
The reason for the elevated superstructure is for better view of operations and line of sight. If there’s a reason in canon i don’t know. It’s done because ships built on Earth have huge exposed bridges and a lot of science fiction bases designs for warships on real world warships.
Where is the bridge in a Star Destroyer?
Introduction. Our present state of knowledge about the structure of the known classes of star destroyers holds that the bridge of the ship is located in the broad hexagonal module at the highest point of the vessel’s dorsal superstructure. The tower is sometimes colloquially known as the “head” of the ship.
Why did the Venator Class Star Destroyer have 2 bridges?
Venator-class Star Destroyers featured two bridges, with the starboard bridge serving as the primary command center of the ship and the port bridge being dedicated to starfighter operations. These bridges were raised from the main body of the destroyer and provided a wide, panoramic view of the battle.
What is the ball on the bottom of a Star Destroyer?
Those are the shield generators. If you saw the Return of the Jedi, you see two A-Wings take out the “ball things” that were located ontop of The Executer. While obviously they would have backups, those are the two main generators. Once you take those out, you have a small amount of time to cause extra damage.
What is the bridge on a Star Wars ship?
A bridge served as the central hub for control and direction of the ship and ship activities. It housed crucial navigation and astrogation computers, and served as the officers’ platform by which all orders were conveyed; communications and ship sterrage as well as for issuing strategy and battle maneuvers.
What is a spaceship bridge?
The bridge is a room or platform of a ship from which the ship can be commanded. When a ship is under way, the bridge is manned by an officer of the watch aided usually by an able seaman acting as a lookout.
Why didn’t the rebels use Venators?
Venators weren’t created until after the OT was done. In Legends the rebels did have some Clone Wars ships but usually nothing as big as a Venator for the same reasons, lack of crew and most being scrapped. It was just simpler to point at Jedi Fallen Order as an example.
How many TIE fighters can a Star Destroyer carry?
In addition to their powerful armament, a Star Destroyer carries troops and vehicles for ground operations and a full wing of TIE Fighters (typically 48 fighters, 12 bombers and 12 boarding craft).
Is there a bridge in Star Wars?
Where is the bridge of a Star Destroyer located?
Our present state of knowledge about the structure of the known classes of star destroyers holds that the bridge of the ship is located in the broad hexagonal module at the highest point of the vessel’s dorsal superstructure. The tower is sometimes colloquially known as the “head” of the ship.
What is a bridge on a ship?
The bridge was a structure on nearly all warships and larger starships. A bridge served as the central hub for control and direction of the ship and ship activities.
Is there a Star Destroyer with a tractor beam targeting array?
Michael Wongfor pointing out a star destroyer which has lost its shields without damage to its scanner globes. Brian Youngfor providing the screenshot of the “tractor beam targeting array” from Behind the Magic; for the Alabamaphoto. Tower faces Several variants of the same basic bridge tower can be observed in the films.
What is the interior of the Star Destroyer Devastator like?
The main bridges of all the star destroyers seen closely in The Empire Strikes Backfollow an interior plan which is markedly unlike that of the Devastator. The room is dominated by a semi-circular panorama of triangular windows, each of which is about two metres high starting from a base about one metre above the deck.