Why is my Seagate hard drive not showing up on my computer?

Posted on by Author

Why is my Seagate hard drive not showing up on my computer?

A reason why your Seagate portable drive is not being recognized could be that you might have plugged it into a faulty or loose USB port. Your Seagate portable drive may not be showing up because of a faulty USB cable as well; so you can replace the USB cable if changing the port doesn’t work.

How do I fix Seagate External Hard Drive not detected?

Basic hardware troubleshooting steps:

  1. Try connecting the drive to a different port on the computer.
  2. If possible, try using a different cable.
  3. Try using the drive on a different computer.
  4. Verify the drive light is on.
  5. Try a different power outlet.
READ:   Do you use his or her with everyone?

How do I fix Windows not detecting my hard drive?

What to Do When Your External Hard Drive Won’t Show Up

  1. Make Sure It’s Plugged In and Powered On. Western Digital My Book.
  2. Try Another USB Port (or Another PC)
  3. Update Your Drivers.
  4. Enable and Format the Drive in Disk Management.
  5. Clean the Disk and Start From Scratch.
  6. Remove and Test the Bare Drive.

How do I reset my Seagate 2tb external hard drive?

Reset using the button

  1. Power down the Seagate Central by unplugging it from power.
  2. Wait approximately 15 seconds.
  3. Power up the Seagate Central again.
  4. Wait for the device to fully boot and show a steady, non-blinking green light. This takes about three to four minutes.
  5. Wait until the light becomes solidly illuminated.

Is there a way to reset a Seagate external hard drive?

On the bottom of the Seagate Central device, there is a RESET button. Using a paperclip or a ballpoint pen, hold down the button for approximately 10-15 seconds until the light on the top of the Central flashes. Wait until the light becomes solidly illuminated.

How do I reset my Seagate external hard drive Windows?

In the main interface, find out the Seagate external HDD, right-click it and choose “Wipe Hard Drive”. Step 3. In the small pop-up window, choose one wiping method (here I choose fill sectors with random data). Then click “OK”.

READ:   Is the 777 and 787 the same type rating?

How do I restore my Seagate 2tb external hard drive?

Reset using the Seagate Central Assistant

  1. Log in with your credentials.
  2. Select the Settings tab.
  3. Select the Restore button. This will restore the device settings to default values.
  4. Proceed with initial setup.

How do I restore my Seagate external hard drive?

Restore Process

  1. Make sure that the drive is detected by your computer.
  2. Launch the Seagate Dashboard software by double-clicking the Seagate Dashboard icon.
  3. From the Home screen select Restore.
  4. Select Search for backups.

Can you reset a Seagate external hard drive?

Reset using the button Power down the Seagate Central by unplugging it from power. Wait approximately 15 seconds. Power up the Seagate Central again. Wait for the device to fully boot and show a steady, non-blinking green light.

Why is my Seagate Backup Plus external hard drive not detected?

There could be several causes that can make your Seagate Backup Plus external hard drive from not getting detected in Windows PC. The causes are as follows: USB post of your PC might be damaged or not working properly. May be your hard drive have got corrupted or damaged.

READ:   What is the first thing you learn in accounting?

How to fix Seagate hard drive partition not working?

Here are the steps: 1 Step 1. Connect Seagate external to computer and open Disk Management. 2 Step 2. Right-click the partition of not working Seagate disk and choose “Change Drive Letter and Paths…”. 3 Step 3. Set a new drive letter to the Seagate disk and click “OK” to confirm. More

Is Seagate a good hard drive brand?

As is known to all, Seagate is a relatively common hard drive brand. And Seagate hard drives are popular among computer users for their good performance. However, users may sometimes encounter problems like Seagate hard drive not detected or Seagate hard drive not recognized.

How do I access the Seagate external hard drive in Windows?

In most cases, you can access the Seagate external hard drive through Windows File Explorer. However, there is a great possibility that the hard drive doesn’t show up in the devices and drives list. Apart from that, the Seagate external hard drive might also not show up in Disk Management. The problem can be caused by one of the following reasons: