Table of Contents
Will HP motherboard fit in ATX case?
Yes, HP does OFTEN use proprietary motherboards, cases and power supplies. Depending on the board model, it COULD be a standard ATX or microATX motherboard, or it could be proprietary.
What motherboard does the HP 8300 use?
HP Compaq Elite 8300 Ultra Slim Desktop Motherboard FORD 656932-001 711787-001
| Brand | The620Guy |
|---|---|
| CPU socket | LGA 1155 |
| RAM memory technology | DDR3 |
| Memory storage capacity | 16 GB |
| RAM memory maximum size | 16 GB |
Can a micro motherboard fit in ATX case?
Backward compatibility microATX was explicitly designed to be backward-compatible with ATX. The mounting points of microATX motherboards are a subset of those used on full-size ATX boards, and the I/O panel is identical. Thus, microATX motherboards can be used in full-size ATX cases.
How can I tell if a motherboard will fit in my case?
Check the case and the mobo’s form factors are the same (or compatible). In your case the mobo is an ATX and the case can handle ITX, micro-ATX, ATX and EATX. So yes it will fit.
How old is HP Compaq?
Compaq was founded in February 1982 by Rod Canion, Jim Harris, and Bill Murto, three senior managers from semiconductor manufacturer Texas Instruments.
When was HP Elite 8300 released?
Regardless of the model, you’re looking at Ivy Bridge CPUs coupled with Intel’s most up-to-date integrated graphics. Expect the 6300 and 8300 to land on June 4th, priced starting at $579 and $679, respectively.
Will an ATX fit in an ATX case?
ATX motherboards can fit in most full-size and mid-size towers, but it’s rare to find a small form factor case that can fit a full size ATX board. There are larger cases designed to support the larger Extended ATX standard motherboards which can usually take ATX boards too.
Will a new motherboard fit in an old case?
You can most likely reuse the old case with a new motherboard, HOWEVER, you need to consider some important details first. How many expansion slots are available on the back of the computer case? If you have four or five expansion slots then you will need to get a MICRO-ATX motherboard.
What power supply do I need for a Compaq elite 8300?
To owners of the SFF (Small Form Factor) model of the HP Compaq Elite 8300 computer: These machines (and I believe the other SFF models of the 8000 series, i.e. 8100, 8200, etc.) utilize a rare PSU (Power Supply Unit) form factor of CFX. The only CFX power supplies I have found are all 240W and are light weight for most graphics cards.
Will the motherboard fit in a standard ATX case?
The motherboard installs just fine in a standard ATX case. I’ve found a solution to power the motherboard with a new PSU which can also power a GPU. However, I fins myself unable to install the CPU cooler as I do not have a backplate bracket for the cooler to screw into.
What is the spare part number for a HP Compaq 8300?
HP Compaq Elite 8300 Small Form Factor PC Item # Description Spare Part Number 1 Front I/O and power switch assembly 636926-001 2 SATA cable, 19.5-inch, 2 straight ends 638813-001 3 SATA drive power cable 636923-001 4 SATA cable, 25.2-inch, 1 straight end, 1 638814-001
Is the HP Compaq elite 8300 SFF flat 6 pin in-line connector wired correctly?
However, the flat 6 pin in-line KF2510-6P female connector on many of these adapters is not wired correctly for the HP Compaq Elite 8300 SFF machine. Looking at the wire end of the connector with the raised guides pointing up and the rectangular holes facing down, the right most wire position is Pin 1 and the left most wire position is Pin 6.