What is the weight of 1 steel bar?

What is the weight of 1 steel bar?

Steel bar supplied in U bent or a straight rod, length of one bar is around 12 metre or 40 feet. Steel bar weight:- generally weight of Steel bar per metre for 8mm bar is around 0.395 kg, for 10mm, its weight around 0.617kg, for 12mm, its weight is 0.889kg and for 16mm, its weight is 1.58kg.

How do you calculate the weight of a steel bar in KG?

Multiply the total length of bar with the following unit weight. For, 10mm ø bar = 0.617 kg/m. 12mm ø bar = 0.888 kg/m….

1. 10mm ø bar = 0.188 kg/ft.
2. 12mm ø bar = 0.270 kg/ft.
3. 16mm ø bar = 0.480 kg/ft.
4. 20mm ø bar = 0.750 kg/ft.
5. 25mm ø bar = 1.172 kg/ft.

How do you calculate the weight of a solid bar?

Weight is calculated by multiplication of volume and its density. Volume of round bar is equal to πD^2/4. H and its density is equal to 7850kg/m3, then its weight, Weight = πD^2/4.

How do you calculate steel weight in feet?

HOW TO CALCULATE WEIGHT OF STEEL BARS IN FEET

1. Is the formula to calculate the weight of steel bars in KG/ft.
2. So the weight of 10 mm bar will be,
3. (10 x 10) / 533 = 0.188 kg/ft.
4. To be accurate W= D2/533 it is.
5. Its is derived from the very basic concept.
6. density of steel in meter =7850 kg/m3 > 7850/(1000X1000X1000) kg/mm.

How do you calculate the weight of steel?

Steel weight formula = πD*2/ 4 × L × density, where w = weight of steel, π = 3.14, D = diameter of Steel bar in mm, L= length of Steel bar =1m and density = 7850 kg/ m3.

What is the weight of steel?

Fact: Most steel weighs about 489 pounds per cubic foot.

What is the weight of 6mm steel bar?

6mm tmt bar weight: weight of 6mm TMT bar is 0.220 kgs per meter, 2.67kgs per piece and 53.33 kgs per bundle.

What is the size of a steel bar?

Size of Steel bars used in building construction are 6mm, 8mm, 10mm, 12mm, 16mm, 20mm and 25mm.

How do you calculate kg of steel?

STEEL QUANTITY:

1. Weight of bar in kg/meter should be calculated as (d2 ÷ 162) where’d’ is the diameter of bar in mm.
2. ‘L’ for column main steel in footing should be considered as minimum 30cm/as specified.
3. For bent up bar add 0.42d in straight length of bar where’d’ is the clear depth of beam/slab.

How do we calculate the unit weight of steel?

Derivation of Formula for Calculating Unit Weight of Steel As we know the density of steel = 7850 kg/ m 3 Weight of steel per metre = Volume × Density [ Volume = Area × Length ] = π/4 x d 2 × 1000 × 7850 kg/m 3 (length = 1000 mm)

How much does steel weigh per cubic inch?

A cubic foot of steel weighs about 490 pounds. The metal weighs 0.2904 pounds per cubic inch. Steel weight formulas are based on theoretical nominal weights and only give approximate values. A 1-inch-square steel bar weighs about 3.40 pounds per lineal foot.

How to calculate unit weight of the structural steel?

Multiply the cubic feet of the steel beam by the density of steel. This equation looks like (5 x 490) for a result of 2,450 lbs. This is the weight of the structural steel beam. The density of steel is approximately 490 lbs per square foot.

How to calculate the weight of steel rolled section?

Procedure to calculate the weight of Rolled Steel Section is: 1. Calculate the Volume of the section. Consider the length 1 m and rest of the data is mentioned above table. 2. For example in Channel sections a) Divide the sections in three parts.